MINI-UHF-19 Emerson Network Power, MINI-UHF-19 Datasheet - Page 249

• Manufacturer Part Number: MINI-UHF-19
• Description: RF Connectors MINI UHF PLUG RG174
• Manufacturer: Emerson Network Power

Specifications of MINI-UHF-19

• Product: Connector
• Rf Series: MUHF
• Gender: Plug
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

BNC Straight Crimp Type Bulkhead Jacks
for Flexible Cable
CP-79-20BM1
CP-79-20BM2
CP-89-19BM1
CP-89-27BM2
PART NO.
Connectivity Solutions
RG-174, 316
RG-178, 196
RG-179
RG-179
CABLE
.315 (8.00)
.315 (8.00)
.315 (8.00)
.226 (5.75)
Tel: [phone]
“A”
STRIP DIMENSIONS
.197 (5.00)
.157 (4.00)
.197 (5.00)
.106 (2.70)
“B”
•
Fax: [phone]
.138 (3.50)
.118 (3.00)
.138 (3.50)
.118 (3.00)
“C”
SLEEVE HEX
.184 (4.67)
.184 (4.67)
.184 (4.67)
.128 (3.25)
CRIMP
Assembly Instructions
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and
•
center conductor. Tin center conductor if contact will be
solder attached. Do not tin center conductor if contact is
to be crimp attached. A wire stripper of correct size is
recommended for this step. Slide heat shrink (as appli-
cable) and crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center conductor
through hole using a minimum amount of solder for a good
joint.
Crimp Attachment (where applicable): Crimp contact
to center conductor using recommended crimp hex.
under braid. Then seat body assembly firmly onto con-
tact. The cable may have to be held in a clamping fixture.
Arrange braid uniformly around crimp stem. Slide crimp
sleeve forward and crimp using recommended crimp hex.
Slide heat shrink forward and shrink (as applicable).
www.EmersonNetworkPower.com/connectivity
None (solder
CRIMP HEX
CONTACT
.066 (1.69)
.066 (1.69)
.066 (1.69)
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
Only)
RECOMMENDED
CRIMP TOOL
24-9912P
24-9912P
24-9912P
94-9963P
249