20-101-1306 Rabbit Semiconductor, 20-101-1306 Datasheet - Page 100

• Manufacturer Part Number: 20-101-1306
• Description: CORE MODULE RCM5750
• Manufacturer: Rabbit Semiconductor
• Type: Serial to Ethernetr

Specifications of 20-101-1306

• Module/board Type: MPU Core Module
• Number Of I/os: 32
• Ethernet Connection Type: 10/100 Base-T
• Memory Type: Flash
• Operating Voltage: 3.3 V
• Operating Current: 70 mA
• Operating Temperature Range: - 40 C to + 85 C
• Board Size: 30 mm x 51 mm x 3 mm
• Product: Modules
• For Use With/related Products: RCM5750
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1183

F.4.2 How to Set Up your Computer for Direct Connect
Follow these instructions to set up your PC or notebook. Check with your administrator if you are
unable to change the settings as described here since you may need administrator privileges. The
instructions are specifically for Windows 2000, but the interface is similar for other versions of
Windows.
1. Go to the control panel (
2. Select the network interface card used for the Ethernet interface you intend to use (e.g.,
3. Now select the
4. Click
MiniCore RCM5700/RCM6700 User’s Manual
work icon.
Xircom Credit Card Network Adapter
which version of Windows your PC is running, you may have to select the “Local Area Con-
nection” first, and then click on the “Properties” button to bring up the Ethernet interface dia-
log. Then “Configure” your interface card for a “10Base-T Half-Duplex” or an “Auto-
Negotiation” connection on the “Advanced” tab.
on “Properties” to assign an IP address to your computer (this will disable “obtain an IP
address automatically”):
TIP: If you are using a PC that is already on a network, you will disconnect the PC from that net-
NOTE: Your network interface card will likely have a different name.
IP Address : 10.10.6.101
Netmask : 255.255.255.0
Default gateway : 10.10.6.1
<OK>
work to run these sample programs. Write down the existing settings before changing them to
facilitate restoring them when you are finished with the sample programs and reconnect your
PC to the network.
or
IP Address
<Close>
Start > Settings > Control Panel
to exit the various dialog boxes.
tab, and check
rabbit.com
) and click on the “Properties” button. Depending on
Specify an IP Address
), and then double-click the Net-
, or select TCP/IP and click
TCP/IP
100