20-101-1306 Rabbit Semiconductor, 20-101-1306 Datasheet - Page 24

• Manufacturer Part Number: 20-101-1306
• Description: CORE MODULE RCM5750
• Manufacturer: Rabbit Semiconductor
• Type: Serial to Ethernetr

Specifications of 20-101-1306

• Module/board Type: MPU Core Module
• Number Of I/os: 32
• Ethernet Connection Type: 10/100 Base-T
• Memory Type: Flash
• Operating Voltage: 3.3 V
• Operating Current: 70 mA
• Operating Temperature Range: - 40 C to + 85 C
• Board Size: 30 mm x 51 mm x 3 mm
• Product: Modules
• For Use With/related Products: RCM5750
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1183

Once you have loaded and executed these sample programs and have an understanding of how
Dynamic C and the RCM5700/RCM6700 modules interact, you can move on and try the other
sample programs, or begin developing your own application.
3.2.1 Use of Serial Flash (not supported for RCM5700/RCM5710)
The following sample programs from the SAMPLES\RCM5700\Serial_Flash folder may be used
with the RCM5750/RCM5760 models.
•
•
MiniCore RCM5700/RCM6700 User’s Manual
SERIAL_FLASHLOG.C
home page of the serial flash “server.” This log can be viewed and cleared from a browser at
http://10.10.6.100/. You will likely have to first “configure” your network interface card for a
“10Base-T Half-Duplex,” “100Base-T Half-Duplex,” or an “Auto-Negotiation” connection on
the “Advanced” tab, which is accessed from the control panel (
Pane
SFLASH_INSPECT.C
flash chip. When the sample program starts running, it attempts to initialize a serial flash chip
on Serial Port B. Once a serial flash chip is found, the user can perform five different com-
mands to print out the contents of a specified page, print out the contents of a range of pages,
clear (set to zero) all the bytes in a specified page, set all bytes on the specified page to a given
value, or save user-specified text to a selected page.
l) by choosing
Network Connections
—This program is a handy utility for inspecting the contents of a serial
—This program runs a simple Web server and stores a log of hits on the
rabbit.com
.
Start > Settings > Control
24