101-0463 Rabbit Semiconductor, 101-0463 Datasheet - Page 19

• Manufacturer Part Number: 101-0463
• Description: COMPUTER SINGLE BOARD BL2120
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0463

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2120
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5. Connect the power supply.
First, prepare the AC adapter for the country where it will be used by selecting the plug.
The BL2100 Tool Kit presently includes Canada/Japan/U.S., Australia/N.Z., U.K., and
European style plugs. Snap in the top of the plug assembly into the slot at the top of the
AC adapter as shown in Figure 5, then press down on the spring-loaded clip below the
plug assembly to allow the plug assembly to click into place.
Connect the bare ends of the power supply to the
terminal header J5 (IDC header J4) as shown in Figure 6.
6. Apply power.
Plug in the AC adapter. If you are using your own power supply, it must provide 9 to
36 V DC (13 to 36 V DC if you intend to use the full range of the D/A converter
outputs)—voltages outside this range could damage the BL2100.
User’s Manual
CAUTION: Unplug the power supply while you make or otherwise work with the connections
NOTE: A hardware RESET is done by unplugging the AC adapter, then plugging it back in.
to the headers. This will protect your BL2100 from inadvertent shorts or power spikes.
Figure 6. Power Supply Connections
+RAW
and
GND
positions on screw-
13