101-0463 Rabbit Semiconductor, 101-0463 Datasheet - Page 58

• Manufacturer Part Number: 101-0463
• Description: COMPUTER SINGLE BOARD BL2120
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0463

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2120
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

RETURN VALUE
SEE ALSO
PARAMETERS
RETURN VALUE
SEE ALSO
PARAMETERS
RETURN VALUE
SEE ALSO
52
void anaOut(unsigned int channel,
void anaOutVolts(unsigned int ch, float voltage);
speed_control is the D/A converter power control option (0—slow or 1—fast (default)).
channel is the D/A converter output channel to write (0–3).
rawcount is the data value corresponding to the desired voltage on the analog output channel (0–4095).
None
Sets the voltage of a D/A converter output channel.
channel is the D/A converter output channel (0–3).
rawcount is a data value corresponding to the voltage desired on the output channel (0–4095).
0 if sucessful.
-1 if rawcount is more than 4095.
Sets the voltage of a D/A converter output channel by using the previously set calibration constants to
calculate the correct data values.
channel is the D/A converter output channel (0–3).
voltage is the voltage desired on the output channel.
None.
unsigned int rawcount);
anaOut, anaOutVolts, anaOutCalib
anaOutDriver, anaOutVolts, anaOutCalib
anaOut, anaOutCalib, brdInit
Test conditions from TI's data sheet (TLV5618A D/A converter) for the speed-control option:
- No load.
- All inputs are at GND or VDD.
- D/A converter latch = 0x800.
1—fast (default)
0—slow
Mode
12 µs access vs. 1 mA
3 µs access vs. 2.3 mA
Speed vs. Power Dissipation
Smartcat (BL2100)