101-0566 Rabbit Semiconductor, 101-0566 Datasheet - Page 25

• Manufacturer Part Number: 101-0566
• Description: COMPUTER SNGLBD BL2100 FRCTNLOCK
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0566

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2100
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.1.1 Headers and Screw Terminals
Standard BL2100 models are equipped with two 1 × 12 screw-terminal strips (J8 and J14),
and two 1 × 14 screw-terminal strips (J5 and J11). The BL2100 and BL2110 also have the
RJ-45 Ethernet jack and one 1 × 16 screw-terminal strip (J2).
There is provision on the circuit board to accommodate one of the following types of
connectors instead of the screw-terminal strips.
• 2 × 17, 2 × 20, and 2 × 25 IDC headers with a pitch of 0.1".
• 1 × 17, 1 × 20, and 1 × 25 friction-lock connectors with a pitch of 0.1". The holes used
• 1 × 17, 1 × 20, and 1 × 25 bottom-mount sockets with a pitch of 0.1". The holes for the
The pinouts for these connectors are shown in Figure 8(b).
User’s Manual
by the friction-lock connectors are on the “outside” edges of the connector locations.
bottom-mount sockets are on the “outside” edges of the connector locations
NOTE: Header J1 and the associated analog I/O are not available on the BL2110 and the
BL2130.
Figure 8(b). BL2100 Pinouts (other 0.1" connectors)
19