ATF20V8BQL-15SC Atmel, ATF20V8BQL-15SC Datasheet - Page 2

• Manufacturer Part Number: ATF20V8BQL-15SC
• Description: IC PLD 15NS 24SOIC
• Manufacturer: Atmel

Specifications of ATF20V8BQL-15SC

• Programmable Type: EE PLD
• Number Of Macrocells: 8
• Voltage - Input: 5V
• Speed: 15ns
• Mounting Type: Surface Mount
• Package / Case: 24-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: ATF20V8BQL15SC

Description
The ATF20V8B is a high-performance CMOS (electrically-
erasable) programmable logic device (PLD) that utilizes
Atmel’s proven electrically-erasable Flash memory technol-
ogy. Speeds down to 7.5 ns and power dissipation as low
as 10 mA are offered. All speed ranges are specified over
the full 5V ± 10% range for industrial temperature ranges,
and 5V ± 5% for commercial temperature ranges.
Several low-power options allow selection of the best solu-
tion for various types of power-limited applications. Each of
Absolute Maximum Ratings*
DC and AC Operating Conditions
2
Temperature Under Bias................................ -55°C to +125°C
Storage Temperature ..................................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground .........................................-2.0V to +7.0V
Voltage on Input Pins
with Respect to Ground
During Programming.....................................-2.0V to +14.0V
Programming Voltage with
Respect to Ground .......................................-2.0V to +14.0V
Operating Temperature (Ambient)
V
CC
Power Supply
ATF20V8B(Q)(L)
(1)
(1)
(1)
these options significantly reduces total system power and
enhances system reliability.
The ATF20V8Bs incorporate a superset of the generic
architectures, which allows direct replacement of the 20R8
family and most 24-pin combinatorial PLDs. Eight outputs
are each allocated eight product terms. Three different
modes of operation, configured automatically with soft-
ware, allow highly complex logic functions to be realized.
*NOTICE:
Note:
Commercial
0°C - 70°C
1.
5V ± 5%
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or any
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Minimum voltage is -0.6V DC which may under-
shoot to -2.0V for pulses of less than 20 ns.Maxi-
mum output pin voltage is V
may overshoot to 7.0V for pulses of less than 20
ns.
-40°C - 85°C
CC
Industrial
5V ± 10%
+ 0.75V DC which