IDTSTAC9200X5NAEB1X IDT, Integrated Device Technology Inc, IDTSTAC9200X5NAEB1X Datasheet - Page 36

• Manufacturer Part Number: IDTSTAC9200X5NAEB1X
• Description: IC AUDIO CODEC 2CH HD 32-QFN
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Audio Codec, HDr

Specifications of IDTSTAC9200X5NAEB1X

• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: No
• S/n Ratio, Adcs / Dacs (db) Typ: 85 / 100
• Dynamic Range, Adcs / Dacs (db) Typ: 80 / 95
• Voltage - Supply, Analog: 3.14 V ~ 3.47 V; 3.8 V ~ 4.2 V; 4.28 V ~ 4.73 V; 4.75 V ~ 5.25 V
• Voltage - Supply, Digital: 3.14 V ~ 3.47 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 32-QFN
• Single Supply Voltage (typ): 3.3V
• Single Supply Voltage (min): 3.135V
• Single Supply Voltage (max): 3.465V
• Package Type: VFQFPN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: STAC9200X5NAEB1X

IDT™
STAC9200
2-CHANNEL HIGH DEFINITION AUDIO CODEC
2-CHANNEL HIGH DEFINITION AUDIO CODEC
5.4.16. AFG GPIOUnsolEn
[31.:4]
[31.:4]
Bit
[3]
Bit
[3]
[2]
[1]
[0]
Set1
Get
Bitfield Name
Bitfield Name
Mask3
Rsvd
Rsvd
En3
En2
En1
En0
Table 41. AFG GPIOUnsolEn Command Response Format
Table 39. AFG GPIOWake Command Response Format
Table 40. AFG GPIOUnsolEn Command Verb Format
Verb ID
F19
719
RW
RW
IDT CONFIDENTIAL
R
RW
RW
RW
RW
RW
R
36
Reset
0x0
0x0
Reset
See bits [7:0] of bitfield table
0x0
0x0
0x0
0x0
0x0
Reserved
Unsolicited enable mask for GPIO3. If set, and the
Unsolicited Response control for this widget has been
enabled, an unsolicited response will be sent when
GPIO3 is configured as input and changes state.
Payload
Reserved
Wake enable for GPIO3:
1= when Azalia link is powered down (RST# is
asserted), a wake-up event will trigger a Status
Change Request event on the link.
Wake enable for GPIO2:
1= when Azalia link is powered down (RST# is
asserted), a wake-up event will trigger a Status
Change Request event on the link.
Wake enable for GPIO1:
1= when Azalia link is powered down (RST# is
asserted), a wake-up event will trigger a Status
Change Request event on the link.
Wake enable for GPIO0:
1= when Azalia link is powered down (RST# is
asserted), a wake-up event will trigger a Status
Change Request event on the link.
0 = wake-up event is disabled;
0 = wake-up event is disabled;
0 = wake-up event is disabled;
0 = wake-up event is disabled;
00
STAC9200
Description
Description
See bitfield table
0000_0000h
Response
PC AUDIO
V 1.6 01/08