EMC1422-1-ACZL-TR SMSC, EMC1422-1-ACZL-TR Datasheet - Page 14

• Manufacturer Part Number: EMC1422-1-ACZL-TR
• Description: Board Mount Temperature Sensors Dual Temp Snsr
• Manufacturer: SMSC

Specifications of EMC1422-1-ACZL-TR

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

APPLICATION NOTE: The ARA does not clear the Status Register and if the MASK bit is cleared prior to the Status
Revision 1.36 (07-02-09)
4.7
4.8
The EMC1422 will respond to the ARA in the following way:
1. Send Slave Address and verify that full slave address was sent (i.e. the SMBus communication
2. Set the MASK bit to clear the ALERT pin.
The EMC1422 responds to hard-wired SMBus slave address as shown in
Note: Other addresses are available. Contact SMSC for more information.
The EMC1422 supports SMBus Timeout. If the clock line is held low for longer than 30ms, the device
will reset its SMBus protocol. This function can be enabled by setting the TIMEOUT bit in the
Consecutive Alert Register (see
SMBus Address
SMBus Timeout
from the device was not prematurely stopped due to a bus contention event).
Register being cleared, the ALERT pin will be reasserted.
Section
DATASHEET
6.13).
14
1°C Temperature Sensor with Hardware Thermal Shutdown
Table
1.1.
SMSC EMC1422
Datasheet