PKJ4113PIT Ericsson Power Modules, PKJ4113PIT Datasheet - Page 38

• Manufacturer Part Number: PKJ4113PIT
• Description: DC/DC Converters & Regulators 12 Vdc 8.3A Iso Input 36-75V 100W
• Manufacturer: Ericsson Power Modules
• Series: PKJr

Specifications of PKJ4113PIT

• Product: Isolated
• Output Power: 100 W
• Input Voltage Range: 36 V to 75 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 12 V
• Output Current (channel 1): 8.3 A
• Isolation Voltage: 1.5 KV
• Package / Case Size: Half Brick
• Output Type: Isolated
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Soldering Information — Through hole mounting
The PKJ series DC/DC converters are intended for through
hole mounting in a PCB. When wave soldering is used max
temperature on the pins is specified to 260°C for 10 seconds.
Maximum preheat rate of 4°C/s and temperature of max
150°C is suggested. When hand soldering, care should be
taken to avoid direct contact between the hot soldering iron
tip and the pins for more than a few seconds in order to
prevent overheating.
No-clean flux is recommended to avoid entrapment of
cleaning fluids in cavities inside of the DC/DC power module.
The residues may affect long time reliability and isolation
voltage.
Delivery package information
The products are delivered antistatic clamshells
Prepared (also subject responsible if other)
EPANHON
Approved
SEC/D (Linda zhong)
PKJ 4000 PI series
DC/DC converters, Input 36-75 V, Output 30A/150W
Tray properties
Material
Surface resistance
Bake ability
Clamshell capacity
Box capacity
PET
10E5 to 10E12 ohms/square
The clamshells can not be baked
10 converters/clamshell
50 converters (5 full clamshells/box)
Checked
(MICKAOV)
PRODUCT SPECIFICATION
No.
4/1301- BMR 630
Date
2006-1-25
Technical Specifi cation
EN/LZT 146 309 R1B February 2006
© Ericsson Power Modules AB
Rev
B
Reference
2 (4)
38