LV5017RU6-36NI LHV Power Corporation, LV5017RU6-36NI Datasheet

Linear & Switching Power Supplies 600W36V@22.2A U-CH FRCD CURRENT SHARING

LV5017RU6-36NI

Manufacturer Part Number

LV5017RU6-36NI

Description

Linear & Switching Power Supplies 600W36V@22.2A U-CH FRCD CURRENT SHARING

Manufacturer

LHV Power Corporation

Datasheet

1.LV5017RF8-48N.pdf (3 pages)

Specifications of LV5017RU6-36NI

Product

Linear

Output Power Rating

600 W

Input Voltage

90 VAC to 264 VAC

Number Of Outputs

Output Voltage (channel 1)

36 V

Output Current (channel 1)

22.22 A

Mounting Style

Plug In

Dimensions

8 in L x 4.33 in W x 2.5 in H

Open Frame/enclosed

Open Frame

Lead Free Status / Rohs Status

Lead free / RoHS Compliant

Current page: 1 of 3
Download datasheet (2Mb)

Input Voltage: 90-264Vac full range, 47~63Hz.

Inrush Current: 70A Max @ 230VAC with full load cold start.

PFC: Active Power Factor Correction meets EN61000-3-2 class D.

Transient Response: Returns to within 1% in less than 2.5mS for a 50%

load change and the peak transient does not excess 5%.

Overshoot: Turn-on & off overshoot < 5% over nominal voltage.

Efficiency: 80% for 12V and 83% minimum for others output @ 230V

and full load.

Turn On Delay: 1.5 second maximum at 230 VAC.

Hold Up Time: 20mS min. at 80% of full load.

Adjustability: Output user adjustable +/-5% minimum.

Remote On-Off: Designated as RSW on CN3, requires a low signal to

inhibit output.

Remote Sense: Designated as RS+ and RS- on CN3, total voltage

compensation for cable losses with respect to the main output.

available for current sharing models.)

LED display: Bi-color LED1 emit Green for Power On; And emit Orange

when protection is enable or RSW is applied a low signal.

Power Good: Designated as PG on the CN3 and TTL high 100-500mS

after regulation. It goes low at least 1mS before loss of regulation for

Power on Reset signal.

Current Sharing: Designated as CSH on the CN3, optional single wired

for forced current sharing function and parallel up to 4 units within 10%

accuracy at full load.

Current Monitor: Designated as CMN on the CN3 is a 0.5V to 3VDC

output voltage to represent 0% to 100% output current.

Input Fusing Protection: a T12A/250V fuse is inserted in primary.

Input Voltage Protection: Power shut down under 80 +/-5Vac, and

recovered over 86Vac.

Short Circuit Protection: Trip without damage and auto-recovery.

Over-Power Protection: Fold back mode 110-140% and auto-recovery

◆ Universal AC Input / Full Range

◆ Optional N+1 Active Current Sharing

◆ Peak Power 900W within 500uS duty duration

◆ Power Factor Corrected to EN61000-3-2 class D

◆ High power density (Max. 9.1 watts per cubic inch)

◆ Approved to UL/CUL/TUV/CB/CE & Class B Emissions

◆ U-Chassis & Enclosed with built-in fan Mechanical Options

FEATURES:

PRODUCT SPECIFICATIONS:

600W - 800W AC-DC ACTIVE PFC SINGLE OUTPUT POWER SUPPLY

(OPTIONAL FOR CURRENT SHARE)

LV5017RN SERIES

(NOT

Over Voltage Protection: Unit latching down when output

voltage reach to 130% maximum and recycle AC input to reset.

Over-Temperature Protection: Unit protected of excessive

operating ambient 85 ℃, and automatic recovery.

Operating Temperature: O to 70℃ ambient, de-rating at 2.5%

per degree from 50℃ to 70℃.

Storage Temperature: -20 to 85 ℃.

Operating Humidity: 5% to 90% RH, Non-condensing.

Storage Humidity: 5% to 95% RH, Non-condensing.

Vibration: 5 ~ 50 Hz, acceleration 7.35 m/s*s on X,Y and Z Axis.

Emissions: FCC Part 15, CISPR 22 class B, Conducted.

Safety Regulation: Approved to UL60950-1, CSA C22.2 No.

60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3 &

IEC61000-4 Series Regulations and CB.

Leakage Current: 3.5mA max. @ 240Vac.

HI-POT Withstand Voltage: 1500 VAC input line to chassis

(10mA DC cut off current); Isolating 3000VAC primary to

secondary windings; Primary to core 1500VAC. All for 3 sec.

Grounding Test: Apply 25 A from ground pin of the three prong

plug to the far most earth. Max allowable resistance 0.1 ohm.

Warranty: 2 years.

MTBF: 150000 Hrs (according to MIL-HBK-217F) at 30℃.

Enclosure:

E Type: 9.17(L) X 4.25(W) X 2.5(H) inches.

U Type: 8(L) x 4.33(W) x 2.5(H) inches.

F Type: 8(L) x 4.33(W) x 3.4(H) inches.

Cooling:

E & F Type: self cooled by built-in fan.

U Type: 25 CFM to achieve maximum power.

Burn in: 45 +/- 5 degree C for 1 hour @230Vac with full load.

Weight: E & F Type: 1500g; U Type: 1400g.

U Type: 8(L) x 4.4(W) x 2.5(H) inches.

F Type: 8(L) x 4.4(W) x 3.4(H) inches.

E Type: 9.2(L) x 4.3(W) x 2.5(H) inches.

Related parts for LV5017RU6-36NI

LV5017RU6-36NI Summary of contents

Page 1

AC-DC ACTIVE PFC SINGLE OUTPUT POWER SUPPLY (OPTIONAL FOR CURRENT SHARE) FEATURES: ◆ Universal AC Input / Full Range ◆ Optional N+1 Active Current Sharing ◆ Peak Power 900W within 500uS duty duration ◆ Power Factor Corrected ...

Page 2

OUTPUT VOLTAGE / CURRENT RATING CHART: Model Input Rating LV5017Rx6-12N(I) 90-264VAC, 10A LV5017Rx6-15N(I) 90-264VAC, 10A 90-264VAC, 10A LV5017Rx6-24N(I) LV5017Rx6-36N(I) 90-264VAC, 10A LV5017Rx6-40N(I) 90-264VAC, 10A 90-264VAC, 10A LV5017Rx6-48N(I) LV5017Rx8-12N(I) 90-264VAC, 12A LV5017Rx8-15N(I) 90-264VAC, 12A 90-264VAC, 12A LV5017Rx8-24N(I) LV5017Rx8-36N(I) 90-264VAC, 12A LV5017Rx8-40N(I) ...

Page 3

Series (Enclosed with built-in Fan Type): 9.17(L) x 4.25(W) x 2.5(H) inches; Weight: 1450g. -LV5017RF-N Series (Enclosed with Top Fan Type): 8(L) x 4.33(W) x 3.4(H) inches; Weight: 1450g. AC Input Connector (CN1): E Type: IEC320 or equivalent Snap-in ...

Related keywords

LV5017RU6-36NI datasheet
LV5017RU6-36NI data sheet
LV5017RU6-36NI pdf datasheet
LV5017RU6-36NI component
LV5017RU6-36NI part
LV5017RU6-36NI distributor
LV5017RU6-36NI RoHS
LV5017RU6-36NI datasheet download