MSO-0011P-012 NCC, MSO-0011P-012 Datasheet - Page 6

• Manufacturer Part Number: MSO-0011P-012
• Description: Socket, Relay; 11 Pin Octal, ID# SR3P-06
• Manufacturer: NCC
• Type: Octalr

Specifications of MSO-0011P-012

• Number Of Contacts: 11
• Time Range: 0.05 Sec. to 999 Min.
• Output Rating: 10 A @ 240 VAC Max.; 100 mA @ 5 VDC Min.
• Operating Temperature: –23°C to +55°C

iv
Our Quality System
AMETEK NCC has a Quality System that utilizes rigid
control processes throughout the design, development, and
manufacturing process to assure our customers of reliable
products. AMETEK NCC justifies its claim of producing high
quality products by placing emphasis on the following:
1. Design Review—As each product is conceived and its
development is planned, detailed design criteria are thor-
oughly reviewed by Marketing, Design Engineering, Quality
Assurance, Manufacturing, Product Test Engineering, and
Product Service and Repair personnel to ensure all require-
ments are met.
2. Supplier Qualification—Every supplier of material that
goes into AMETEK NCC products is evaluated for their
capability to produce and deliver material according to
specified requirements and must maintain an acceptable
performance rating.
3. Incoming Inspection/Test—Materials received
are inspected/tested to ensure they meet all required
specifications.
4. In-Process Inspection/Testing—Inspection and testing
occurs throughout the production process to verify the
following:
●
●
●
5. Final Inspection/Test—Finished products are final
inspected/tested to ensure compliance with all AMETEK
NCC customer specifications.
6. Quality Audits—AMETEK NCC departments are audited
for compliance with quality system requirements.
7. Standards Compliance—AMETEK NCC products
are designed to comply with Underwriters Laboratory’s,
Canadian Standards Association’s and the Federal
Communications Commission’s standard requirements
for safety and emissions control. These activities are con-
function and hi-pot per UL standards
operating conditions)
Proper assembly and overall workmanship of products
Products are calibrated, electrically tested for proper
Life tested (products are burned-in to simulate actual
ducted on a sample basis per MIL-STD-105E
Sampling Standard. The measurement/test equip-
ment used during all product stages are calibrated
per AMETEK NCC’s in-house process that conforms
to MIL-STD-45662 Standard for Calibration Systems
requirements.
8. Documentation—AMETEK NCC’s Quality System
is completely described in our Quality Assurance
Manual which is available upon request along with
our Product Workmanship Standard. Since all
products are final inspected/tested after being 100%
functionally tested during production, AMETEK
NCC also offers a Certificate of Conformance, upon
request, to customers desiring to minimize their
internal process times by eliminating the need to
perform an incoming inspection/test on AMETEK
NCC products.
Total Quality Management
The above eight items highlight AMETEK NCC’s
Quality System. Together with marketing/sales,
customer service, production planning, auto-
mated information systems, accounting/finance,
corrective action, training, and statistical process
control,they represent AMETEK NCC’s Total Quality
Management concept.