H5CX-AD-N AC24/DC12-24 Omron Automation, H5CX-AD-N AC24/DC12-24 Datasheet - Page 11

• Manufacturer Part Number: H5CX-AD-N AC24/DC12-24
• Description: Relay; E-Mech; Timing; Multi-Function; Cur-Rtg 5A; Ctrl-V 24/12-24AC/DC; Screw; 11 Pin
• Manufacturer: Omron Automation
• Type: Timerr

Specifications of H5CX-AD-N AC24/DC12-24

• Brand/series: H5CX
• Connection Type: Screw Terminals
• Contact Form: 5 A at 250VAC/30 VDC
• Dimensions: 58H x 48W x 98.5D
• Display Type: 7 Segment LCD
• Function: Multifunction Digital Timer
• Input Type: Signal, Reset and Gate
• Ip Rating: IP66
• Mounting Type: Flush, Surface or Din Rail
• Number Of Inputs: 3
• Number Of Outputs: 1
• Output Type: SPDT
• Primary Type: Digital Timer
• Voltage, Supply: 12-24 VDC/24 VAC

Dimensions with Flush Mounting Adapter
H5CX-A-N/-AS-N (Provided with Adapter and Waterproof Packing)
H5CX-AD-N/-ASD-N (Provided with Adapter and Waterproof Packing)
H5CX-A11@-N (Adapter and Waterproof Packing Ordered Separately)
H5CX-L8@-N (Adapter and Waterproof Packing Ordered Separately)
58
58
58
58
48
48
Y92S-29 (order separately)
Waterproof Packing
48
Y92S-29 (order separately)
Waterproof Packing
48
Y92S-29 (provided)
Waterproof
Packing
Y92S-29 (provided)
Waterproof
Packing
(51)
(51)
(51)
(51)
7.5
7.5
7.5
7.5
Panel
Panel
Panel
Panel
Y92F-30 (order separately)
Flush Mounting Adapter
57.5
Y92F-30 (provided)
Flush Mounting Adapter
Y92F-30 (provided)
Flush Mounting Adapter
Y92F-30 (order separately)
Flush Mounting Adapter
76.5
84.8
89.9
P3G-08 (order
separately)
Back-connecting
Socket
P3GA-11 (order
separately)
Back-connecting
Socket
Panel Cutouts
Panel cutouts areas shown below. (according
to DIN43700).
Note: 1. The mounting panel thickness
Dimensions with Front
Connecting Socket
* These dimensions vary with the type of DIN track
(reference value).
H5CX-A@-N/-L@-N
2. To allow easier operation, it is
3. It is possible to mount Timers
60 min.
103.2
*
*
92.3
P2CF-08(-E) (order separately)
Front Connecting Socket
P2CF-11(-E) (order separately)
Front Connecting Socket
With Y92A-48F1 attached.
A={48n-2.5+(n-1)×4}
With Y92A-48 attached.
A = (51n - 5.5)
should be 1 to 5 mm.
recommended that Adapters
be mounted so that the gap
between sides with hooks is at
least 15 mm (i.e., with the
panel cutouts separated by at
least 60 mm).
side by side, but only in the
direction without the hooks.
(However, if Timers are
mounted side by side, water
resistance will be lost.)
n Units mounted side-by-side
15 min.
45
+0.6
A=(48n-2.5)
0
H5CX
-A11@-N
H5CX
-L8@-N
45
A
+0.6
0
+1
–0
+1
–0
60 min.
+1
–0
100.9
90
11