HS9Z-A55 IDEC Corporation, HS9Z-A55 Datasheet
HS9Z-A55
Specifications of HS9Z-A55
Related parts for HS9Z-A55
HS9Z-A55 Summary of contents
Page 1
... HS5E Series HS5E Series Miniature Solenoid Locking Switches HS5E features: • World’s smallest 4 contact solenoid interlock switch. ( 146 mm) • Four contacts • Gold-plated contacts • Spring lock type (unlocks when the solenoid is energized) and solenoid lock type (locks when solenoid is energized) are available • ...
Page 2
... Contact confi guration shows the contact status when actuator is inserted and solenoid off for for spring lock or solenoid on for solenoid lock. Actuator Keys Item Part Number Description HS9Z-A51 Straight HS9Z-A52 Right-angle Horizontal/vertical operation (for HS9Z-A55 hinged doors) (see note below) The actuator tensile strength is 500N minimum. Part Numbers Contact Arrangement (+) ...
Page 3
... OFF (open) ON (energized) OFF (de-energized) The characteristics shown in the chart above are of the HS9Z-A61, -A62, -A65, and -A66 actuators. For the HS9Z-A62S actuator, subtract 0.6 mm. (stroke in mm) The characteristics show the contact status when the actuator enters an entry slot of an interlock switch. ...
Page 4
... Vibration Resistance Damage limits: 30 Hz, amplitude 1.5 mm minimum Actuator Operating Speed 0.05 to 1.0 m/s Actuator HS9Z-A51 minimum Positive Opening Travel Actuator HS9Z-A52/A55 minimum Positive Opening Force 80N minimum Tensile Strength when Locked 1000 N minimum (GS-ET-19) Operating Frequency 900 operations per hour ...
Page 5
... Actuator Key Mounting Reference Position As shown in the fi gure on the right, the mounting reference position of the actuator when inserted in the safety switch is: HS9Z-A51: The actuator lightly touches the actuator stop placed on the safety switch. HS9Z-A52: The actuator cover lightly touches the actuator stop placed on the safety switch ...
Page 6
... Door Interlock Switches Dimensions and Mounting Hole Layouts, continued Vertically/Horizontally Movable Actuator (HS9Z-A55) Angle Adjustment Horizontal Swing (M3 Hexagon Socket Head Screw) 3 Orienting Actuator Stop Insert (Note 18.5 29 Vertical Swing Actuator Stop Orienting (Note) Insert 0.8 Angle Adjustment (M3 Hexagon Socket Head Screw) ...
Page 7
... After adjusting the actuator angle, apply loctite to the adjustment screw so that the screw will not loosen. Safety Switch When using the HS9Z-A55 horizontally-movable actuator Mounting Holes • When the center of the hinged door is on the extension line of the contact Door Hinge ...
Page 8
... HS9Z-A51: 2.0 ± 0.2 N·m (two M4 screws) HS9Z-A52: 1.0 ± 0.2 N·m (two M4 Phillips screws) HS9Z-A55: 1.0 ± 1.5 N·m (two M4 screws) • The above recommended tightening torques of the mounting screws are the values confi rmed with hex socket head bolts. When other screws are used and tightened to a smaller torque, make sure that the screws do not become loose after mounting ...
Page 9
... When using the interlock switch on hinged doors, refer to the minimum radius of doors shown below. When using on doors with small minimum radius, use the angle adjustable actuator (HS9Z-A55). Wire Connection • The HS2B has 3 conduit ports, which are closed as a part of the molded switch housing. • ...
Page 10
... Cracks or burrs on the conduit entry may deteriorate the housing protection. • When changing to the other conduit port, close the unused opening with an optional plug (accessory). Type No. HS9Z-P1 Manual Unlocking • Remove the screw located on the unlocking entry at the side of the switch us- ing the key wrench included with the switch ...
Page 11
... M4 Phillips screws) The screws are supplied by the user. Applicable Wire Size • HS1C: 0.5 to 0.75 mm 1.0 to 1.25 mm • HS5B: 0.5 to 1.25 mm • HS1E: 0.5 to 1.25 mm HS9Z-A1 Actuator USA: 800-262-IDEC Canada: 888-317-IDEC Precautions (PF13.5): RBC-103PG13.5 G1 max. (Terminals No. (Terminals No.3, 4, and grounding terminal) ...
Page 12
... When the door hinge is on the extension line of the interlock switch surface: Door Hinge • When door hinge is on the extension line of the actuator mounting surface: Door Hinge When using the HS9Z-A55 Angle Adjustable Actuator • When door hinge is on the extension line of the interlock switch surface • ...