TEP 100-2412-CMF TRACOPOWER, TEP 100-2412-CMF Datasheet - Page 2

• Manufacturer Part Number: TEP 100-2412-CMF
• Description: DC/DC CONVERTER; CHASSIS MOUNT; 100 WATT; INPUT 18-36VDC; 12VDC; 8.4A
• Manufacturer: TRACOPOWER
• Type: Industrialr

Specifications of TEP 100-2412-CMF

• Brand/series: TEP 100 Series
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 12 V @ 8.4 A
• Primary Type: DC-DC
• Special Features: Wide 2:1 input voltage range; Full load operation up to 60°C withconvection cooling; Input protection filter
• Voltage, Input: 18-36 VDC
• Voltage, Output: 12 VDC
• Ultra Wide 2: 1 Input Voltage Range
• Lead Free Status / Rohs Status: RoHS Compliant part

http://www.tracopower.com
Input Specifications
Input current at no load
Input current at full load
Start-up voltage / under voltage shut down
Surge voltage (100 msec. max.)
Conducted noise
ESD (electrostatic discharge)
Radiated immunity
Fast transient / Surge
Conducted immunity
Reverse voltage protection
Recommended input fuse (slow blow)
Output Specifications
Voltage set accuracy
Output voltage adjustment
Regulation
Temperature coefficient
Minimum load
Remote sense
Ripple and noise (20 MHz Bandwidth)
– Input variation Vin min. to Vin max.
– Load variation (0 – 100 %)
24 Vin; 3.3 – 15 VDC models: 185 mA typ.
48 Vin; 3.3 – 15 VDC models: 90 mA typ.
12 Vin; 3.3 – 15 VDC models: 210 mA typ.
24 Vin; 24 – 48 VDC models: 85 mA typ.
48 Vin; 24 – 48 VDC models: 40 mA typ.
12 Vin; 24 – 48 VDC models: 100 mA typ.
3.3 – 15 VDC models: 0.3 % max.
24 & 28 VDC models: 200 mVpk-pk max.
24 – 48 VDC models: 0.3 % max.
12 & 15 VDC models: 100 mVpk-pk max.
3.3 & 5 VDC models: 75 mVpk-pk max.
48 VDC models: 300 mVpk-pk max.
24 Vin models: 4.6 A typ.
48 Vin models: 2.3 A typ.
24 Vin models: 17.5 VDC / 16 VDC typ.
48 Vin models: 35.5 VDC / 34 VDC typ.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
24 Vin models: 10 A
48 Vin models: 5 A
12 Vin models: 9.4 A typ.
12 Vin models: 8.5 VDC / 7.5 VDC typ.
12 Vin models: 36 V max.
12 Vin models: 15 A
EN 55022 level A, FCC part 15, level A
(chassis mount option –CFM required)
EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 200 µF, 100 V, ESR 48 mOhm
or with chassis mount option –CFM
EN 61000-4-6, 10 Vrms, perf. criteria A
parallel diode
±1 %
+10 % / –20 % by external resistor
see application note:
www.tracopower.com/products/tep100-application.pdf
0.2 % max.
±0.02 %/K
not required
10 % max. of Vout nom.
(including tim up value)
DC/DC Converters
TEP 100 Series
100 Watt
Page 2 of 6