TEP 100-2412-CMF TRACOPOWER, TEP 100-2412-CMF Datasheet - Page 6

• Manufacturer Part Number: TEP 100-2412-CMF
• Description: DC/DC CONVERTER; CHASSIS MOUNT; 100 WATT; INPUT 18-36VDC; 12VDC; 8.4A
• Manufacturer: TRACOPOWER
• Type: Industrialr

Specifications of TEP 100-2412-CMF

• Brand/series: TEP 100 Series
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 12 V @ 8.4 A
• Primary Type: DC-DC
• Special Features: Wide 2:1 input voltage range; Full load operation up to 60°C withconvection cooling; Input protection filter
• Voltage, Input: 18-36 VDC
• Voltage, Output: 12 VDC
• Ultra Wide 2: 1 Input Voltage Range
• Lead Free Status / Rohs Status: RoHS Compliant part

Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. [phone] · Fax [phone] · [e-mail] · www.tracopower.com
TEP 100 module with chassis mount adabtor (suffix –CM or –CMF)
Suffix –CM: Chassis mount adaptor
Suffix –CMF: Chassis mount adaptor with EMI filter
Specifications can be changed any time without notice.
Chassis Mount Adaptor
For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection
board (soldered to converter pins)and a chassis mount adaptor.
In addition this Chassis mount option is available with an EMI-filter(see EMI specification)
0.14
(3.5)
4 x
Ø
0.17
2.126
1.90
2.40
(4.3)
(48.3)
(61.0)
(54.0)
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
Please note that adaptors cannot be ordered as seperate
items but are factory assembled.
Dimensions in Inch, () = mm
Tolerances ±0.02 (±0.5)
Mounting hole pich tolerances ±0.01 (±0.25)
Pin
1
2
3
4
5
6
7
8
9
DC/DC Converters
TEP 100 Series
Connection
Remote On/Off
+ Sense*
– Sense*
– Vout
+ Vout
– Vin
+ Vin
Case
Trim
100 Watt
Page 6 of 6
Rev. 05/10