PIC32MX460F256LT-80V/PT Microchip Technology, PIC32MX460F256LT-80V/PT Datasheet - Page 3

• Manufacturer Part Number: PIC32MX460F256LT-80V/PT
• Description: 256 KB Flash, 32 KB RAM, USB-OTG, 80 MHz, 10-Bit ADC, DMA 100 TQFP 12x12x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX460F256LT-80V/PT

• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 100-TQFP
• Core: MIPS
• Processor Series: PIC32MX4xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 80 MHz
• Data Ram Size: 32 KB
• Number Of Programmable I/os: 5
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Mounting Style: SMD/SMT
• Interface Type: USB, I2C, UART, RS-232, RS-485, SPI
• Maximum Operating Temperature: + 105 C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

High-Performance 32-bit RISC CPU:
• MIPS32
• 80 MHz maximum frequency
• 1.56 DMIPS/MHz (Dhrystone 2.1) performance at
• Single-cycle multiply and high-performance divide
• MIPS16e
• Two sets of 32 core register files (32-bit) to reduce
• Prefetch Cache module to speed execution from
Microcontroller Features:
• Operating temperature range of -40ºC to +105ºC
• Operating voltage range of 2.3V to 3.6V
• 32K to 512K Flash memory (plus an additional
• 8K to 32K SRAM memory
• Pin-compatible with most PIC24/dsPIC
• Multiple power management modes
• Multiple interrupt vectors with individually
• Fail-Safe Clock Monitor Mode
• Configurable Watchdog Timer with on-chip
Peripheral Features:
• Atomic SET, CLEAR and INVERT operation on
• Up to 4-channel hardware DMA with automatic
• USB 2.0-compliant full-speed device and
• USB has a dedicated DMA channel
• 3 MHz to 25 MHz crystal oscillator
• Internal 8 MHz and 32 kHz oscillators
© 2011 Microchip Technology Inc.
0 wait state Flash access
unit
interrupt latency
Flash
12 KB of boot Flash)
devices
programmable priority
Low-Power RC Oscillator for reliable operation
select peripheral registers
data size detection
On-The-Go (OTG) controller
High-Performance, General Purpose and USB 32-bit
®
®
M4K
mode for up to 40% smaller code size
®
32-bit core with 5-stage pipeline
Flash Microcontrollers
®
DSC
PIC32MX3XX/4XX
• Separate PLLs for CPU and USB clocks
• Two I
• Two UART modules with:
• Up to two SPI modules
• Parallel Master and Slave Port (PMP/PSP) with
• Hardware Real-Time Clock and Calendar (RTCC)
• Five 16-bit Timers/Counters (two 16-bit pairs
• Five capture inputs
• Five compare/PWM outputs
• Five external interrupt pins
• High-Speed I/O pins capable of toggling at up to
• High-current sink/source (18 mA/18 mA) on all I/O
• Configurable open-drain output on digital I/O pins
Debug Features:
• Two programming and debugging Interfaces:
• Unintrusive hardware-based instruction trace
• IEEE Standard 1149.2-compatible (JTAG)
Analog Features:
• Up to 16-channel 10-bit Analog-to-Digital
• Two Analog Comparators
- RS-232, RS-485 and LIN support
- IrDA
8-bit and 16-bit data and up to 16 address lines
combine to create two 32-bit timers)
80 MHz
pins
- 2-wire interface with unintrusive access and
- 4-wire MIPS
boundary scan
Converter:
- 1000 ksps conversion rate
- Conversion available during Sleep, Idle
decoder
real-time data exchange with application
interface
2
C™ modules
®
with on-chip hardware encoder and
®
standard enhanced JTAG
DS61143H-page 3