PIC32MX460F256LT-80V/PT Microchip Technology, PIC32MX460F256LT-80V/PT Datasheet - Page 97

• Manufacturer Part Number: PIC32MX460F256LT-80V/PT
• Description: 256 KB Flash, 32 KB RAM, USB-OTG, 80 MHz, 10-Bit ADC, DMA 100 TQFP 12x12x1mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX460F256LT-80V/PT

• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 100-TQFP
• Core: MIPS
• Processor Series: PIC32MX4xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 80 MHz
• Data Ram Size: 32 KB
• Number Of Programmable I/os: 5
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 3.6 V
• Operating Temperature Range: - 40 C to + 105 C
• Mounting Style: SMD/SMT
• Interface Type: USB, I2C, UART, RS-232, RS-485, SPI
• Maximum Operating Temperature: + 105 C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

10.0
The PIC32MX Direct Memory Access (DMA) controller
is a bus master module useful for data transfers
between different devices without CPU intervention.
The source and destination of a DMA transfer can be
any of the memory mapped modules existent in the
PIC32MX (such as Peripheral Bus (PBUS) devices:
SPI, UART, PMP, and so on) or memory itself.
Following are some of the key features of the DMA
controller module:
• Four Identical Channels, each featuring:
FIGURE 10-1:
© 2011 Microchip Technology Inc.
- Auto-Increment Source and Destination
- Source and Destination Pointers
- Memory to Memory and Memory to
INT Controller
Note 1: This data sheet summarizes the features
Peripheral Bus
Address Registers
Peripheral Transfers
2: Some registers and associated bits
DIRECT MEMORY ACCESS
(DMA) CONTROLLER
of the PIC32MX3XX/4XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 31. “Direct
Memory Access (DMA) Controller”
(DS61117)
Reference Manual”, which is available
from
(www.microchip.com/PIC32).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
the
Global Control
(DMACON)
DMA BLOCK DIAGRAM
Address
Decoder
of
Microchip
System IRQ
the
“PIC32
web
Family
Channel 0
Channel 1
Channel n
site
Control
Control
Control
in
• Automatic Word-Size Detection:
• Fixed Priority Channel Arbitration
• Flexible DMA Channel Operating Modes:
• Flexible DMA Requests:
• Multiple DMA Channel Status Interrupts:
• DMA Debug Support Features:
• CRC Generation Module:
Channel Priority
- Transfer Granularity, down to byte level
- Bytes need not be word-aligned at source
- Manual (software) or automatic (interrupt)
- One-Shot or Auto-Repeat Block Transfer
- Channel-to-channel chaining
- A DMA request can be selected from any of
- Each channel can select any (appropriate)
- A DMA transfer abort can be selected from
- Pattern (data) match transfer termination
- DMA channel block transfer complete
- Source empty or half empty
- Destination full or half-full
- DMA transfer aborted due to an external
- Invalid DMA address generated
- Most recent address accessed by a DMA
- Most recent DMA channel to transfer data
- CRC module can be assigned to any of the
- CRC module is highly configurable
Arbitration
I
I
I
I
and destination
DMA requests
modes
the peripheral interrupt sources
observable interrupt as its DMA request
source
any of the peripheral interrupt sources
event
channel
available channels
0
1
2
n
PIC32MX3XX/4XX
Y
Interface
Bus
Device Bus + Bus Arbitration
DS61143H-page 97