MC100EP445FA ON Semiconductor, MC100EP445FA Datasheet - Page 10

• Manufacturer Part Number: MC100EP445FA
• Manufacturer: ON Semiconductor

Specifications of MC100EP445FA

• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Package Type: LQFP
• Pin Count: 32
• Mounting: Surface Mount
• Lead Free Status / Rohs Status: Not Compliant

converter with two modes of operation selected by
CKSEL (Pin 7). CKSEL HIGH mode only latches data on
the rising edge of the input CLK and CKSEL LOW mode
latches data on both the rising and falling edge of the input
CLK. CKSEL LOW is the open default state. Either of the
two differential input serial data path provided for this
device, SINA and SINB, can be chosen with the SINSEL pin
(pin 25). SINA is the default input path when SINSEL pin
is left floating. Because of internal pull−downs on the input
pins, all input pins will default to logic low when left open.
The MC10/100EP445 is an integrated 1:8 serial to parallel
RESET
PCLK
CLK
(Asynchronous Reset)
RESET
APPLICATION INFORMATION
Figure 7. Reset Timing Diagram
http://onsemi.com
10
The two selectable serial data paths can be used for
loop−back testing as well as the bit error testing.
random state. To synchronize multiple flip–flops in the
device, the Reset (pin 1) must be asserted. The reset pin will
disable the internal clock signal irrespective of the CKEN
state (CKEN disables the internal clock circuitry). The
device will grab the first stream of data after the falling edge
of RESETÀ, followed by the falling edge of CLKÁ, on
second rising edge of CLKÂ in either CKSEL modes. (See
Figure 6)
Upon power−up, the internal flip−flops will attain a
(Synchronous ENABLE)
À
RESET
Á
Â