W83697UG Nuvoton Technology Corporation of America, W83697UG Datasheet - Page 46

• Manufacturer Part Number: W83697UG
• Description: IC LPC SUPER I/O 128-PQFP
• Manufacturer: Nuvoton Technology Corporation of America

Specifications of W83697UG

• Applications: PC's, PDA's
• Interface: LPC
• Voltage - Supply: 3.3V, 5V
• Package / Case: 128-XFQFN
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Supplier Unconfirmed, Lead free / RoHS Compliant

6.13 Logical Device B (PWM)
CR30 (Default 0x00)
CR60, CR61 (Default 0x00, 0x00)
These two registers select Pulse Width Modulation base address [0x100:0xFFF] on 8-byte boundary.
6.14 Logical Device C (SMART CARD)
CR30 (Default 0x00)
CR60, CR61 (Default 0x00, 0x00)
These two registers select Smart Card base address [0x100:0xFFF] on 8-byte boundary.
CR70 (Default 0x00)
CRF0 (Default 0x00)
6.15 Logical Device D (URC & GPIO Port 6 )
CR30 (Default 0x00)
CR60, CR61 (Default 0x03, 0xE8 if PNPCSV = 0 during POR, default 0x00, 0x00 otherwise)
These two registers select the Serial Port 3 I/O base address [0x100:0xFF8] on 8yte boundary.
Bit [7:1]: Reserved.
Bit 0:
Bit [7:1]: Reserved.
Bit 0:
Bit [7:4]: Reserved.
Bit [3:0]: These bit select IRQ resource for Smart Card interface.
Bit [7:2]: Reserved.
Bit 1:
Bit 0:
Bit [7:1]: Reserved.
Bit 0:
1
0
1
0
1
0
1
0
1
0
Activates the logical device.
Logical device is inactive.
Activates the logical device.
Logical device is inactive.
Activate GPIO6.
GPIO6 is inactive
Activate URC.
URC is inactive.
Smart Card present signal (SCPSNT) is LOW active.
SCPSNT is HIGH active.
- 46 -
W83697UF/W83697UG