1-1734531-2 TE Connectivity, 1-1734531-2 Datasheet - Page 3

• Manufacturer Part Number: 1-1734531-2
• Description: Board to Board / Mezzanine Connectors RCPT 2MM 12P R ANG MT 8AU 3.ST
• Manufacturer: TE Connectivity

Specifications of 1-1734531-2

• Product Type: Receptacles
• Pitch: 2 mm
• Stack Height: 4.85 mm
• Mounting Style: Through Hole
• Mounting Angle: Right
• Number Of Positions / Contacts: 12
• Number Of Rows: 2
• Housing Material: Thermoplastic, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Gold (10)
• Voltage Rating: 200 VAC
• Current Rating: 1 A
• Connector Type: Connector Assembly
• Pcb Mount Style: Through Hole
• Shrouded: No
• Pcb Mount Retention: Without
• Pcb Mounting Orientation: Right Angle
• Keyed: No
• Holddown Feature: Without
• Post Size (mm [in]): 0.50 [.020]
• Voltage (vac): 200
• Contact - Rated Current (a): 1
• Insulation Resistance (m?): 1,000
• Termination Post Length (mm [in]): 3.00 [0.118]
• Solder Tail Contact Plating: Tin over Nickel
• Centerline (mm [in]): 2.00 [0.079]
• Number Of Positions: 12
• Selectively Loaded: No
• Post Number(s) Omitted: None
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Mating Pin-to-pcb Dimension (mm [in]): 1.50 [0.059]
• Mount Type: Printed Circuit Board
• Cover: Without
• Contact Plating, Mating Area, Material: Gold (10)
• Contact Base Material: Phosphor Bronze
• Connector Style: Receptacle
• Dielectric Strength (vac): 650
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Housing Entry Style: Closed Top
• Stack Height (mm [in]): 4.85 [0.191]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LR7189
• Temperature Range (°c): -40 – +105
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Packaging Method: Tube
• Lead Free Status / Rohs Status: Details

3.5.4.1
3.5.4.2
3.5.4.3
3.5.4.4
3.5.4.5
3.5.4.6
3.5.4.7
3.4.5.8
NO.
Rev
B
Vibration
Temperature Life
(Heat Aging)
Humidity, Steady
State
Thermal Shock
Resistance to
Soldering Heat
Durability (Repeated
Mate /Unmating)
Salt Spray
Resistance to Wave
Soldering Heat
Resistance to Wave
Soldering Heat
Resistance to Wave
Soldering Heat
Resistance to
Reflow Soldering
Heat
Resistance to
Reflow Soldering
Heat
TEST ITEMS
No electrical discontinuity greater
than 1 microsecond.
Termination resistance (low level)
shall be met.
Termination resistance 40m
ohms Max.
Insulation Resistance (Final)
500M ohms min.
Termination resistance (low level)
shall be met.
Termination resistance (low level)
shall be met.
No Physical damage
Termination resistance (low level)
shall be met.
30mΩ Max. (Final)
No physical damage shall occur.
No physical damage shall occur.
No physical damage shall occur.
No physical damage shall occur.
No physical damage shall occur.
ENVIRONMENTAL REQUIREMENTS
REQUIREMENTS
Figure 1
Subject mated connectors to 10-55-10 Hz
traversed in 1minutes at 1.52mm amplitude 2
Hours each of 3 mutually perpendicular
planes.
MIL-STD-202, Method201, Condition A
Subject mated connector assemblies to
temperature life at 85° C±2° C for 96 hours.
Subject mated connectors to steady state
humidity at 40° C±2° C and 90-95% R.H for 96
hrs.
Subject mated connector assemblies on 5
cycle –55 ° C and +80° C for 30 minutes each
duration at temperature extremes.
MIL-STD-202, Method 107, Condition A
Subject connector mounted on printed circuit
boards to solder bath at 260±5°C for 5±1
seconds (Flow soldering).
MIL-STD-202, Method 210, Condition C.
Subject connector assembly to 50 cycles of
repeated mating /unmating at a rate of 10
cycles a minute.
Exposing in a heat chamber at a temperature
of 35° C ±2° C for 24 hours.
EIA-364-26A, CONDIION A.
Solder Temp. : 240±5℃, 10±0.5sec.
Tyco spec. 109-202, Condition A
Solder Temp. : 265±5℃, 10±0.5sec.
Tyco spec. 109-202, Condition B
Solder Temp. : 260±5℃, 10±0.5sec.
Tyco spec. 109-202, Condition C
Pre-soak condition, 85℃/85﹪RH for 168
hours.
Pre Heat: 150~180℃, 90±30sec.
Heat: 230℃ Min., 30±10sec.
Peak Temp. : 245+0/-5℃, 10~30sec.
Duration: 3 cycles
Tyco spec. 109-201, Condition A
Pre-soak condition, 85℃/85﹪RH for 168
hours.
Pre Heat: 150~180℃, 90±30sec.
Heat: 230℃ Min., 30±10sec.
Peak Temp. : 260+0/-5℃, 20~40sec.
Duration: 3 cycles
Tyco spec. 109-201, Condition B
PROCEDURES
108-57197
3 of 5