WD30-AT001 Omron, WD30-AT001 Datasheet - Page 93

• Manufacturer Part Number: WD30-AT001
• Description: REMOTE WIRELESS ANTENNA'S DNET
• Manufacturer: Omron

Specifications of WD30-AT001

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: WD30AT001

Actual Example
6-2
6-2-1
6-2-2
Preparation
Setting from the
configurator
6-2-3
Temporary installation
Actual Example
System configuration example
System setting
Installation test
Although omitted in the above illustration, it is assumed that the communica-
tion power is supplied to all wireless units via the communication cables and
that terminators are installed.
Connect the wireless master station and configurator with the DeviceNet net-
work. The wireless slave stations do not need to be prepared at this stage.
After starting up the configurator, set the system configuration of the relay sta-
tion and enter it in the wireless master station on the screen of the parameter
setting function of the wireless unit.
• Temporarily install the wireless master station, relay station, and slave
• Set the switches as described in the illustration of the system configura-
stations to the respective determined positions.
tion example.
Wireless slave station
WNODE=02 SW1=bit3 OFF
(not dedicated for relay station)
DeviceNet master
unit
Wireless slave station
WNODE=01 SW1=bit3 ON
(dedicated for relay station)
Wireless master station
WNODE=00
DeviceNet network
DeviceNet slaves
Configurator
1 relay stages
(no. of hops:2)
Section 6-2
81