Headers & Wire Housings 10 POS HDR R/A 30 AU KEY XY

3-316080-3

Manufacturer Part Number3-316080-3
DescriptionHeaders & Wire Housings 10 POS HDR R/A 30 AU KEY XY
ManufacturerTE Connectivity
SeriesD3200M Series
3-316080-3 datasheets
 


Specifications of 3-316080-3

Product TypeHeaders - ShroudedConnector TypeHeader
MountBoard MountKeyedYes
Product SeriesD-3200M (Modular Type)Pcb Mounting OrientationRight Angle
Pcb Mount StyleThrough HolePcb Mount RetentionWith
KeyingXYVoltage Rating (vac)600
Termination End PlatingGold over NickelNumber Of Positions10
Number Of Rows2Centerline, Matrix (mm [in])5.08 x 5.08 [.200 x .200]
Pcb Mount Retention TypeBoardlock(s)Contact TypePin
Contact Plating, Mating Area, MaterialGold (30)Contact Base MaterialCopper Alloy
Connector StylePlugHousing MaterialThermoplastic - GF
Ul Flammability RatingUL 94V-0Housing ColorBlack
Rohs/elv ComplianceRoHS compliant, ELV compliantLead Free Solder ProcessesWave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
Rohs/elv Compliance HistoryConverted to comply with RoHS directiveApplies ToPrinted Circuit Board
Packaging Quantity14Packaging MethodTube
Lead Free Status / Rohs Status Details  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
10
Page 10
11
12
Page 1/12

Download datasheet (451Kb)Embed
Next
1.適用範囲
1.1 内容
本規格はダイナミックコネクタD-3000シリー
ズの製品性能、試験方法、品質保証の必要条件を規
定している。適用製品群はFig.1の通りである。
2. 参考規格類
以下規格類は本規格中で規定する範囲内に於いて、
本規格の一部を構成する。万一本規格と製品図面の
間に不一致が生じた時は、製品図面を優先して適用
すること。万一本規格と参考規格類の間に不一致が
生じた時は、本規格を優先して適用すること。
2.1 TE 規格
A. 114-5148
: 取付適用規格
B. 501-5013, 501-78324
: 認定試験報告書
2. 2.2 民間団体規格
A. MIL-STD-202 : 電子電気部品の試験方法
B. EIA-364 : 電気コネクタの試験方法
3.一般必要条件
3.1 設計と構造
製品は該当製品図面に規定された設計、構造、物理的
寸法をもって製造されていること。
タイコ エレクトロニクスジャパン合同会社 (〒213-8535 川崎市高津区久本 3-5-8)
* : 商標
Product Specification
製品規格
1. Scope :
1.1 Contents
This specification covers the requirements for
product performance, test methods and quality
assurance provisions of D-3000 Series.
Applicable product description are as shown in
Fig.1
製品群/Description
D-3000 シリーズ/D-3000 SERIES
Fig.1
2. Applicable Documents :
The following documents form a part of this
specification to the extent specified herein.
In the event of conflict between the requirements
of this specification and the product drawing,
the product drawing shall take precedence.
In the event of conflict between the requirements
of this specification and the referenced
documents, this specification shall take
precedence.
2.1 TE Specifications :
A. 114-5148 : Application Specification
B. 501-5013, 501-78324 : Qualification Test Report
2.2 Commercial Standards and Specifications :
A. MIL-STD-202 : Test Methods for Electronic and
B. EIA-364 : Electrical Connector / Socket Test
Procedures Including Enveronmental
Classifications
3. Requirements:
3.1 Design and Construction :
Product shall be of the design, construction
and physical dimensions specified on the
applicable product drawing.
108-5349
ダイナミックコネクタ
シリーズ
Electrical Component Parts
1 of 12

3-316080-3 Summary of contents

  • Page 1

    ... TE Specifications : A. 114-5148 : Application Specification B. 501-5013, 501-78324 : Qualification Test Report 2.2 Commercial Standards and Specifications : A. MIL-STD-202 : Test Methods for Electronic and B. EIA-364 : Electrical Connector / Socket Test Procedures Including Enveronmental Classifications 3. Requirements: 3.1 Design and Construction : Product shall be of the design, construction and physical dimensions specified on the applicable product drawing ...

  • Page 2

    ... All tests shall be performed in the room temperature, unless otherwise specified. : Nickel plating all over Rec : Gold plating(Contact Area) or Tin-plating(All over) Tin-plating(Tine Area) or Tin-plating(All over) Tin-plating(All over) : Tin plating 250V AC/DC(for 3.81 mm pitch Connector) 600V AC/DC(for 5.08 mm pitch Connector) maximum allowable current to be applied. #24 #26 # ...

  • Page 3

    ... Test Requirements and Procedures Summary 項目 試験項目 Para. Test Items 3.5.0 製品の確認 3.5.0 Examination of Product 3.5.1 総合抵抗 ...

  • Page 4

    ... MIL-STD-202,試験法213,条件 electrical discontinuity Accelerated Velocity :490 m/s greater than 1 μs. Waveform Shall occur. Duration Termination Resistance Number of Drops : 3 drops each to normal (Low Level) and reversed directions and Z axes, totally 18 drops. EIA364-27B Method A MIL-STD-202,Method213,Condition A 108-5349 試 験 ...

  • Page 5

    ... Measure the force required to insert Per 1 contact contact into housing. 振動中1μs. をこえる不連続導 振動周波数 : 10~500Hz / 15 min 通を生じないこと。 加速度 振動方向 ...

  • Page 6

    ... EIA364-52 MIL-STD-202 試験法208 Wet Solder Coverage : Solder Temperature : ...

  • Page 7

    ... MIL-STD-202 試験法107 条件 A-1 Termination Resistance Mated/Unmated connector (Low Level) -55° min.,+85° min. Making this a cycle, repeat 25 cycles. EIA364-32 MIL-STD-202 Method 107 Condition A-1 試験後、絶縁抵抗、耐電圧及び ...

  • Page 8

    ... MIL-STD-202 試験法101 条件 A Termination Resistance Subject mated connectors salt (Low Level) concentration for 96h : EIA364-26B Condition A MIL-STD-202 Method 101 Condition A Fig. 3 (終り) Fig. 3 (End) 108-5349 試 験 方 法 Procedures ガス 10±3 ppm Gas : 10±3 ppm ...

  • Page 9

    ... Rev. J5 Product Specification 製品規格 Fig.4 Fig.5 108-5349 ...

  • Page 10

    ... Temperature Life 塩水噴霧 Salt Spray (a) 欄内の数字は試験の順序を示す。/Numbers indicate sequence in which the tests are performed. Rev. J5 Product Specification 製品規格 ...

  • Page 11

    ... Pressure 4.2 製品再認定試験 もし製品に、形状、組合せや嵌合、又は機能に 相当の影響を及ぼす変更がなされた時には、品 ...

  • Page 12

    ... Rev. J5 Product Specification 製品規格 4.3 Acceptance: Acceptance is based on verification that the product meets the requirements of Figure.3 Failures attributed to equipment,test get up, or operator deficiencies shall not disqualify the product. When product failure occurs,corrective action shall be taken and samples resubmitted for qualification. ...