AGLN125V2-VQG100 Actel, AGLN125V2-VQG100 Datasheet - Page 13

• Manufacturer Part Number: AGLN125V2-VQG100
• Manufacturer: Actel

Part Number and Revision Date
List of Changes
Previous Version
Advance v0.7
(April 2009)
Advance v0.6
(February 2009)
Advance v0.5
(February 2009)
Advance v0.4
(December 2008)
Advance v0.3
(November 2008)
Advance v0.2
(October 2008)
Wide Range I/O Support
Actel nano devices support JEDEC-defined wide range I/O operation. IGLOO nano devices support
both the JESD8-B specification, covering both 3 V and 3.3 V supplies, for an effective operating
range of 2.7 V to 3.6 V, and JESD8-12 with its 1.2 V nominal, supporting an effective operating
range of 1.14 V to 1.575 V.
Wider I/O range means designers can eliminate power supplies or power conditioning components
from the board or move to less costly components with greater tolerances. Wide range eases I/O
bank management and provides enhanced protection from system voltage spikes, while providing
the flexibility to easily run custom voltage applications.
Part Number 51700110-001-7
Revised January 2010
The following table lists critical changes that were made in the current version of the document.
The
(1.5 V systems) and 160 MHz (1.2 V systems) System Performance."
The note for AGLN030 in the
AGLN030 is available in the Z feature grade only.
The
hot-swap and cold-sparing.
The –F speed grade is no longer offered for IGLOO PLUS devices. The speed grade
column and note regarding –F speed grade were removed from
Ordering
section was removed.
The QN100 package was removed for all devices.
Table 1 · IGLOO nano Devices
AGLN030 from 81 to 77.
The
The following table note was removed from
chip (main) and three quadrant global networks are available for AGLN060 and
above."
The CS81 package was added for AGLN250 in the
in the Z Feature Grade"
The second table note in
"AGLN060, AGLN125, and AGLN250 in the CS81 package do not support PLLs.
AGLN030 and smaller devices do not support this feature
The I/Os per package for CS81 were revised to 60 for AGLN060, AGLN125, and
AGLN250 in the
The
support for 1.14 V to 1.575 V.
The AGLN030 device was added to product tables and replaces AGL030 entries
that were formerly in the tables.
The
number of I/Os for AGLN060, AGLN125, and AGLN250 from 66 to 64.
The
"I/Os with Advanced I/O Standards" section
"Device Marking" section
"Advanced I/Os" section
"Wide Range I/O Support" section
"Reprogrammable Flash Technology" section
"I/Os Per
Information". The
Package"table was updated for the CS81 package to change the
"I/Os Per
Changes in Current Version (Advance v0.8)
table.
Package"table.
Table 1 · IGLOO nano Devices
A dv a n c e v 0. 8
was updated to include wide power supply voltage
was updated to change the maximum user I/Os for
"IGLOO nano Devices"
"Speed Grade and Temperature Grade Matrix"
is new.
is new.
Table 1 · IGLOO nano
was revised to add definitions for
"IGLOO nano Product Available
was revised to add "
table was revised. It states
."
was revised to state,
IGLOO nano Device Overview
"IGLOO nano
Devices: "Six
250 MHz
I
Page
III,
N/A
to
1-8
1-9
IV
III
II
II
I
I
I
I
I
I
IV
IV
1 - 9