ATUC128D3 Atmel Corporation, ATUC128D3 Datasheet - Page 69

• Manufacturer Part Number: ATUC128D3
• Manufacturer: Atmel Corporation

Specifications of ATUC128D3

• Flash (kbytes): 128 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 48 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 25
• Hardware Qtouch Acquisition: Yes
• Max I/o Pins: 51
• Ext Interrupts: 51
• Usb Transceiver: 1
• Usb Speed: Full Speed
• Usb Interface: Device
• Spi: 1
• Twi (i2c): 2
• Uart: 3
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 7
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

8.3.1.3
8.3.1.4
32000D–04/2011
Unrecoverable Exception
TLB Multiple Hit Exception
The Unrecoverable Exception is generated when an exception request is issued when the
Exception Mask (EM) bit in the status register is asserted. The Unrecoverable Exception can not
be masked by any bit. The Unrecoverable Exception is generated when a condition has
occurred that the hardware cannot handle. The system will in most cases have to be restarted if
this condition occurs.
TLB Multiple Hit exception is issued when multiple address matches occurs in the TLB, causing
an internal inconsistency.
This exception signals a critical error where the hardware is in an undefined state. All interrupts
are masked, and PC is loaded with EVBA + 0x04. MMU-related registers are updated with infor-
mation in order to identify the failing address and the failing TLB if multiple TLBs are present.
TLBEHI[ASID] is unchanged after the exception, and therefore identifies the ASID that caused
the exception.
*(--SP
*(--SP
SR[R] = 0;
SR[J] = 0;
SR[M2:M0] = B’110;
SR[EM] = 1;
SR[GM] = 1;
PC = EVBA + 0x00;
TLBEAR = FAILING_VIRTUAL_ADDRESS;
TLBEHI[VPN] = FAILING_PAGE_NUMBER;
TLBEHI[I] = 0/1, depending on which TLB caused the error;
*(--SP
*(--SP
SR[R] = 0;
SR[J] = 0;
SR[M2:M0] = B’110;
SR[EM] = 1;
SR[GM] = 1;
PC = EVBA + 0x04;
SYS
SYS
SYS
SYS
) = PC of offending instruction;
) = SR;
) = PC of offending instruction;
) = SR;
AVR32
69