SAM3S8C Atmel Corporation, SAM3S8C Datasheet - Page 450
SAM3S8C
Manufacturer Part Number
SAM3S8C
Description
Manufacturer
Atmel Corporation
- Current page: 450 of 1143
- Download datasheet (20Mb)
25.1.8
25.1.9
25.1.10
450
450
SAM3S8/SD8
SAM3S8/SD8
Peripheral Clock Controller
Free Running Processor Clock
Programmable Clock Output Controller
Figure 25-8. USB Clock Controller
The Power Management Controller controls the clocks of each embedded peripheral by means
of the Peripheral Clock Controller. The user can individually enable and disable the Clock on the
peripherals.
The user can also enable and disable these clocks by writing Peripheral Clock Enable 0
(PMC_PCER0), Peripheral Clock Disable 0 (PMC_PCDR0), Peripheral Clock Enable 1
(PMC_PCER1) and Peripheral Clock Disable 1 (PMC_PCDR1) registers. The status of the
peripheral clock activity can be read in the Peripheral Clock Status Register (PMC_PCSR0) and
Peripheral Clock Status Register (PMC_PCSR1).
When a peripheral clock is disabled, the clock is immediately stopped. The peripheral clocks are
automatically disabled after a reset.
In order to stop a peripheral, it is recommended that the system software wait until the peripheral
has executed its last programmed operation before disabling the clock. This is to avoid data cor-
ruption or erroneous behavior of the system.
The bit number within the Peripheral Clock Control registers (PMC_PCER0-1, PMC_PCDR0-1,
and PMC_PCSR0-1) is the Peripheral Identifier defined at the product level. The bit number cor-
responds to the interrupt source number assigned to the peripheral.
The Free Running Processor Clock (FCLK) used for sampling interrupts and clocking debug
blocks ensures that interrupts can be sampled, and sleep events can be traced, while the pro-
cessor is sleeping. It is connected to Master Clock (MCK).
The PMC controls 3 signals to be output on external pins, PCKx. Each signal can be indepen-
dently programmed via the Programmable Clock Registers (PMC_PCKx).
PCKx can be independently selected between the Slow Clock (SLCK), the Main Clock
(MAINCK), the PLLA Clock (PLLACK), the PLLB Clock (PLLBCK) and the Master Clock (MCK)
by writing the CSS field in PMC_PCKx. Each output signal can also be divided by a power of 2
between 1 and 64 by writing the PRES (Prescaler) field in PMC_PCKx.
Each output signal can be enabled and disabled by writing 1 in the corresponding bit, PCKx of
PMC_SCER and PMC_SCDR, respectively. Status of the active programmable output clocks
are given in the PCKx bits of PMC_SCSR (System Clock Status Register).
Moreover, like the PCK, a status bit in PMC_SR indicates that the Programmable Clock is actu-
ally what has been programmed in the Programmable Clock registers.
Source
Clock
USB
/1,/2,/3,.../16
USBDIV
Divider
UDP
UDP Clock (UDPCK)
11090A–ATARM–10-Feb-12
11090A–ATARM–10-Feb-12
Related parts for SAM3S8C
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
ARM-based Flash MCU
Manufacturer:
ATMEL [ATMEL Corporation]
Datasheet:
Part Number:
Description:
INTERVAL AND WIPE/WASH WIPER CONTROL IC WITH DELAY
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Low-Voltage Voice-Switched IC for Hands-Free Operation
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
MONOLITHIC INTEGRATED FEATUREPHONE CIRCUIT
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
AM-FM Receiver IC U4255BM-M
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Monolithic Integrated Feature Phone Circuit
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
Multistandard Video-IF and Quasi Parallel Sound Processing
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
High-performance EE PLD
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
8-bit Flash Microcontroller
Manufacturer:
ATMEL Corporation
Datasheet:
Part Number:
Description:
2-Wire Serial EEPROM
Manufacturer:
ATMEL Corporation
Datasheet: