9-776629-6 TE Connectivity, 9-776629-6 Datasheet - Page 2

• Manufacturer Part Number: 9-776629-6
• Manufacturer: TE Connectivity

Specifications of 9-776629-6

• Product Type: Connector
• Connector Type: Connector Assembly
• Receptacle Configuration: 040/070 Hybrid
• Pcb Mounting Orientation: Vertical
• Mating Connector Lock: With
• Mating Connector Lock Type: Hinge Lock
• Mating Connector Number Positions: 10, 22
• Keyed: Yes
• Proprietary Name: MULTILOCK
• Panel Mount Retention: Without
• Number Of Rows: 2
• Number Of Positions: 32
• Key Location: Inboard
• Contact Type: Tab
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Post Tin
• Connector Style: Receptacle
• Housing Color: Gray
• Housing Material: PBT - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board

3.3.
3.4.
3.5.
Rev A
3.5.1
3.5.2
3.5.3
3.5.4
3.5.5
3.5.6
3.5.7
3.5.8
Para
Ratings
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 2. Unless otherwise specified, all tests shall be performed at room temperature.
Test Requirements and Procedures Summary
Confirmation of Product
Termination Resistance,
Specified Current
Termination Resistance, Low
Level
Dielectric Strength
Insulation Resistance
Current Leakage
Temperature Rising
Current Cycling
Temperature: -30 to 105
Test Item
/
C
ELECTRICAL REQUIREMENTS
Product shall be conforming to
the requirements of applicable
product drawing and Application
Specifications 114-5159 and
114-5160.
.040II: 10 milliohms maximum
initial; 20 milliohms maximum
final.
.070II, III: 3 milliohms maximum
initial; 10 milliohms maximum
final.
.040II: 10 milliohms maximum
initial; 20 milliohms maximum
final.
.070II, III: 3 milliohms maximum
initial; 10 milliohms maximum
final.
No creeping discharge nor
flashover shall occur.
100 megohms minimum.
1 milliampere maximum.
60
current.
.040II: 20 milliohms maximum
final.
.070II, III: 10 milliohms maximum
final.
No ignition allowed during test.
Figure 1 (continued)
/
C maximum under specified
Requirement
Visually, dimensionally and
functionally inspected per
applicable quality inspection
plan.
Measure initial millivolt drop of
contact test circuit in mated
connectors. Figure 3.
AMP Spec 109-5311-2.
Subject mated contacts
assembled in housing to closed
circuit current of 10 milliamperes
maximum at open circuit voltage
of 20 millivolts maximum. Figure
3.
AMP Spec 109-5311-1.
1 kilovolt AC for 1 minute. Test
between adjacent circuits of
mated/unmated connectors.
AMP Spec 109-5301.
Impressed voltage 500 volts DC.
Test between adjacent circuits of
mated connectors.
AMP Spec 109-5302.
12 volts DC impressed 1 minute.
AMP Spec 109-5312.
Measure temperature rise by
energized current.
AMP Spec 109-5310.
Applied current per Figures 6
and 7. 45 minutes ON, 15
minutes OFF, 200 cycles.
AMP Spec 109-5308.
Procedure
108-5342-3
2 of 12