9-776629-6 TE Connectivity, 9-776629-6 Datasheet - Page 4

• Manufacturer Part Number: 9-776629-6
• Manufacturer: TE Connectivity

Specifications of 9-776629-6

• Product Type: Connector
• Connector Type: Connector Assembly
• Receptacle Configuration: 040/070 Hybrid
• Pcb Mounting Orientation: Vertical
• Mating Connector Lock: With
• Mating Connector Lock Type: Hinge Lock
• Mating Connector Number Positions: 10, 22
• Keyed: Yes
• Proprietary Name: MULTILOCK
• Panel Mount Retention: Without
• Number Of Rows: 2
• Number Of Positions: 32
• Key Location: Inboard
• Contact Type: Tab
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Post Tin
• Connector Style: Receptacle
• Housing Color: Gray
• Housing Material: PBT - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board

Rev A
3.5.16 Contact Insertion Force
3.5.17 Contact Retention Force, Pre-
3.5.18 Contact Retention Force,
3.5.19 Crimp Tensile Strength
3.5.20 Durability, Repeated
3.5.21 Resistance to “Kojiri”
3.5.22 Solderability
3.5.23 Handling Ergonomics
3.5.24 Double Lock Plate Locking
3.5.25 Thermal Shock
Para
Lock
Secondary Lock
Mating/Unmating
Strength
Test Item
ENVIRONMENTAL REQUIREMENTS
9.8 N maximum per contact.
49 N minimum.
78 N minimum.
.040II: 20 milliohms maximum
final.
.070II, III: 10 milliohms maximum
final.
.040II: 20 milliohms maximum
final.
.070II, III: 10 milliohms maximum
final.
Wet solder coverage: 95%
minimum, plated area only.
No abnormalities allowed in
manual mating/unmating
handling.
59 N Maximum.
.040II: 20 milliohms maximum
final.
.070II, III: 10 milliohms maximum
final.
mm
0.85
1.25
Figure 1 (continued)
0.3
0.5
Wire Size
2
AWG
Requirement
22
20
18
16
Crimp Tensile Operation speed: 100 mm per
N minimum
127
177
58
88
Measure force required to insert
contacts into housing.
AMP Spec 109-5211.
Operation speed: 100 mm per
minute. Apply an axial pull-off
load to crimped wire.
AMP Spec 109-5212.
Operation speed: 100 mm per
minute. Measure contact
retention force with secondary
lock in effect.
minute. Apply an axial pull-off
load to crimped wire of contact
secured on the tester.
AMP Spec 109-5205.
Operation speed: 100 mm per
minute. 30 cycles.
AMP Spec 109-5213.
Repeated mating/unmating by
hand. 30 cycles.
AMP Spec 109-5215.
Solder temperature: 230 ± 5
Immersion duration: 3 ± 0.5
seconds
Flux: Alpha 100
AMP Spec 109-5203.
Manually operated.
Operation speed: 100 mm per
minute. Measure force required
to lock the double lock plate.
-30
120 minutes (1 cycle). Repeat
for 5 cycles.
AMP Spec 109-5103.
/
C for 120 minutes; 80
Procedure
108-5342-3
/
4 of 12
C for
/
C