STM8L162M8 STMicroelectronics, STM8L162M8 Datasheet - Page 8

• Manufacturer Part Number: STM8L162M8
• Description: STM8L-Ultra Low Power-8 bits Microcontrollers
• Manufacturer: STMicroelectronics

Specifications of STM8L162M8

• Operating Power Supply: 1.65 to 3.6 V (without BOR), 1.8 to 3.6 V (with BOR)
• Temperature Range: − 40 to 85 or 125 °C
• 5 Low Power Modes: Wait, Low power run, Low power wait, Active-halt with RTC, Halt
• Ultralow Leakage Per I/0: 50 nA
• Fast Wakeup From Halt: 5 μs
• Max Freq: 16 MHz, 16 CISC MIPS peak
• Lcd: 8x40 or 4x44 w/ step-up converter

Introduction
1
2
8/121
Introduction
This document describes the features, pinout, mechanical data and ordering information for
the high density STM8L162R8 and STM8L162M8 devices.For further details on the
STMicroelectronics Ultralow power family please refer to
continuum on page
For detailed information on device operation and registers, refer to the reference manual
(RM0031).
For information on to the Flash program memory and data EEPROM, refer to the
programming manual (PM0054).
For information on the debug module and SWIM (single wire interface module), refer to the
STM8 SWIM communication protocol and debug module user manual (UM0470).
For information on the STM8 core, refer to the STM8 CPU programming manual (PM0044).
Description
The high density STM8L162xx Ultralow power devices feature an enhanced STM8 CPU
core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the
advantages of a CISC architecture with improved code density, a 24-bit linear addressing
space and an optimized architecture for low power operations.
The family includes an integrated debug module with a hardware interface (SWIM) which
allows non-intrusive in-application debugging and ultrafast Flash programming.
All high density STM8L162xx microcontrollers feature embedded data EEPROM and low
power low-voltage single-supply program Flash memory.
The devices incorporate an extensive range of enhanced I/Os and peripherals, a 12-bit
ADC, two DACs, two comparators, a real-time clock, AES, 8x40 or 4x44-segment LCD, four
16-bit timers, one 8-bit timer, as well as standard communication interfaces such as two
SPIs, an I
the same peripherals to be found in different ST microcontroller families including 32-bit
families. This makes any transition to a different family very easy, and simplified even more
by the use of a common set of development tools.
2
C interface, and three USARTs. The modular design of the peripheral set allows
11.
Doc ID 17959 Rev 2
Section 2.3: Ultralow power
STM8L162R8, STM8L162M8