TA8221AHQ Toshiba, TA8221AHQ Datasheet - Page 4

• Manufacturer Part Number: TA8221AHQ
• Manufacturer: Toshiba

Specifications of TA8221AHQ

• No. Of Channels: 2
• Package: HZIP 17-P-2.00
• Recommended Vcc (v): 13.2
• Rl=2 Ohm: 26W x 2
• Rl=4 Ohm: 19W x 2
• Rl=8 Ohm: -
• Features/built-in Functions: 2 BTL channels, standby switch
• Operating Voltage (v): 9 to 18

3. Preventive measure against oscillation
4. Adjustment of output offset (when the power supply turn on)
(reference) In case of setting the condition (G
For preventing the oscillation, it is advisable to use C4, the condenser of polyester film having small
characteristic fluctuation of the temperature and the frequency.
The condenser (C6) between input and GND is effective for preventng oscillation which is generated with a
feedback signal from an output stage.
The resistance R to be series applied to C4 is effective for phase correction of high frequency, and improves the
oscillation allowance.
In case of its use with the voltage gain G
because the phase−inversion is caused by the high frequency resulting in making the oscillation liable generated.
As this IC is contructed with DC circuit on the primary stage, it is necessary to lower a input offset or output
offset by agreement with the each leading edge time constant of the input voltage in the primary stage and NF
terminal voltage.
Concretely, monitor the output DC voltage and vary the capacity value in input condenser and NF condenser (see
Fig.4)
(1) Voltage gain to be used (G
(2) Capacity value of condenser
(3) Kind of condenser
(4) Layout of printed board
V
V
setting)
reduced or with the feedback amount increased, care must be taken
V
= 40dB) with R
4
f
= 470Ω.
TA8221AHQ / ALQ
2004-09-28