TB2926HQ Toshiba, TB2926HQ Datasheet - Page 18

• Manufacturer Part Number: TB2926HQ
• Manufacturer: Toshiba

Specifications of TB2926HQ

• No. Of Channels: 4
• Package: HZIP 25-P-1.00F
• Recommended Vcc (v): 13.2
• Rl=2 Ohm: Not Supported
• Rl=4 Ohm: 43W x 4
• Rl=8 Ohm: -
• Features/built-in Functions: 4 BTL channels, standby switch, mute, low-RON BiCD process, DC offset detection
• Operating Voltage (v): 9 to 18

RESTRICTIONS ON PRODUCT USE
About solderability, following conditions were confirmed
• Solderability
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
• The products described in this document shall not be used or embedded to any downstream products of which
• The information contained herein is presented only as a guide for the applications of our products. No responsibility
• The products described in this document are subject to the foreign exchange and foreign trade laws.
(1) Use of Sn-37Pb solder Bath
(2) Use of Sn-3.0Ag-0.5Cu solder Bath
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety
in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such
TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.
021023_C
· solder bath temperature = 230°C
· dipping time = 5 seconds
· the number of times = once
· use of R-type flux
· solder bath temperature = 245°C
· dipping time = 5 seconds
· the number of times = once
· use of R-type flux
021023_A
021023_B
18
021023_D
060106_Q
TB2926HQ
021023_E
2006-11-27
060116EBA