MC74LCX244DTG ON Semiconductor, MC74LCX244DTG Datasheet - Page 10

• Manufacturer Part Number: MC74LCX244DTG
• Description: IC BUFF/DVR TRI-ST DUAL 20TSSOP
• Manufacturer: ON Semiconductor
• Series: 74LCXr

Specifications of MC74LCX244DTG

• Logic Type: Buffer/Line Driver, Non-Inverting
• Number Of Elements: 2
• Number Of Bits Per Element: 4
• Current - Output High, Low: 24mA, 24mA
• Voltage - Supply: 2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP
• Logic Family: 74LCX
• Number Of Channels Per Chip: Octal
• Polarity: Non-Inverting
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• High Level Output Current: - 24 mA
• Input Bias Current (max): 10 uA
• Low Level Output Current: 24 mA
• Maximum Power Dissipation: 200 mW
• Minimum Operating Temperature: - 40 C
• Number Of Lines (input / Output): 3
• Output Type: 3-State
• Propagation Delay Time: 7.5 ns @ 2.7 V or 6.5 ns @ 3 V to 3.6 V
• Logic Device Type: Buffer, Non Inverting
• Supply Voltage Range: 2V To 3.6V
• Logic Case Style: TSSOP
• No. Of Pins: 20
• Operating Temperature Range: -40°C To +85°C
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Family Type: LCX
• Logical Function: Buffer/Line Driver
• Number Of Elements: 2
• Number Of Channels: 8
• Number Of Inputs: 8
• Number Of Outputs: 8
• Operating Supply Voltage (typ): 2.5/3.3V
• Package Type: TSSOP
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 2V
• Quiescent Current: 10uA
• Technology: CMOS
• Pin Count: 20
• Mounting: Surface Mount
• Operating Temp Range: -55C to 125C
• Operating Temperature Classification: Military
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MC74LCX244DTG; MC74LCX244DTGOS

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
20X
PIN ONE REFERENCE
0.10 C
0.05 C
2X
0.10
0.08
0.15
2X
20X
C
C
A B
NOTE 3
20X
0.15
C
b
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
L
A2
C
2
9
1
D2
D
11
(A3)
e
19
12
e
A1
E
B
A
20X
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
E2
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
K
A
http://onsemi.com
CASE 485AA−01
C
SEATING
PLANE
ISSUE A
QFN20
10
NOTES:
1. DIMENSIONING AND TOLERANCING PER
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS b APPLIES TO PLATED
4. COPLANARITY APPLIES TO THE EXPOSED
ASME Y14.5M, 1994.
TERMINAL AND IS MEASURED BETWEEN
0.25 AND 0.30 MM FROM TERMINAL.
PAD AS WELL AS THE TERMINALS.
DIM
A1
A2
A3
D2
E2
A
b
D
E
K
L
e
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MILLIMETERS
MIN
0.80
0.00
0.65
0.20
0.85
2.85
0.20
0.35
0.20 REF
2.50 BSC
4.50 BSC
0.50 BSC
MAX
1.00
0.05
0.75
0.30
1.15
3.15
0.45
---
MC74LCX244/D