1604366-4 Tyco Electronics, 1604366-4 Datasheet - Page 12

• Manufacturer Part Number: 1604366-4
• Description: Metal Shell Micro Circular Threaded Coupling Connectors; ADAPTER,OVERMOLD,7 POS ( Tyco Electronics )
• Manufacturer: Tyco Electronics

3.10. PC Board Mount Receptacle Assembly
Metal–Shell Micro Circular Connectors may be pc board mounted. The following procedures provide
application information for this process.
3.11. PC Board Contact Tine Holes
These connectors are used with plated–through holes. The drilled hole size, plating types, and plating
thickness are dependent on customer application requirements. The finished hole size must be as stated in
Figure 20 to provide unrestricted insertion and ensure adequate application of the solder to the connector
solder tines.
12 of 17
Metal-Shell Micro Circular Connectors
NOTE
A. Material and Thickness
B. Tolerance
Maximum allowable bow of the pc board shall be 0.13 mm [.005 in.] over the length of the receptacle
connector.
C. PC Board Layout
The mounting and contact holes in the pc board must be precisely located to ensure proper placement and
optimum performance of the connector. See Figure 19. The connectors are placed on the pc board
manually.
i
1. PC Board material will be glass epoxy (FR–4, G–10).
2. The receptacle connector can be installed on 1.57 mm [.062 in.] thick pc boards. Board thickness
may vary depending upon the application; however, contact tine length through the pc board becomes
important for wave soldering operations. A recommended minimum of 0.76 mm [.030 in.] of the contact
solder tine should protrude through the pc board.
Contact the Product Information number at the bottom of page 1 for suitability of other pc board materials,
thicknesses, specialized pc board designs, or applications.
Finished Hole
Tyco Electronics Corporation
Figure 19
114-13201
Rev A