ADP3335ARM-18 Analog Devices, ADP3335ARM-18 Datasheet - Page 3

• Manufacturer Part Number: ADP3335ARM-18
• Description: High Accuracy Ultralow IQ/ 500 mA anyCAP Low Dropout Regulator
• Manufacturer: Analog Devices

REV. 0
ABSOLUTE MAXIMUM RATINGS*
Input Supply Voltage . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V
Shutdown Input Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V
Power Dissipation . . . . . . . . . . . . . . . . . . . Internally Limited
Operating Ambient Temperature Range . . . . –40°C to +85°C
Operating Junction Temperature Range . . . –40°C to +150°C
θ
θ
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . 300°C
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . 215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
*This is a stress rating only; operation beyond these limits can cause the device to
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the ADP3335 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
be permanently damaged.
JA
JA
4-layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110°C/W
2-layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153°C/W
Model
ADP3335ARM-1.8
ADP3335ARM-2.5
ADP3335ARM-2.85
ADP3335ARM-3.3
ADP3335ARM-5
*Contact the factory for other output voltage options.
Output
Voltage*
1.8 V
2.5 V
2.85 V
3.3 V
5 V
ORDERING GUIDE
–3–
Pin
No.
1, 2, 3 OUT
4
5
6
7, 8
Package
RM-8 (MSOP-8)
RM-8 (MSOP-8)
RM-8 (MSOP-8)
RM-8 (MSOP-8)
RM-8 (MSOP-8)
Option
Mnemonic
GND
NR
SD
IN
PIN FUNCTION DESCRIPTIONS
PIN CONFIGURATION
GND
OUT
OUT
OUT
Function
Output of the Regulator. Bypass to
ground with a 1.0 µF or larger capacitor.
All pins must be connected together for
proper operation.
Ground Pin.
Noise Reduction Pin. Used for further
reduction of output noise (see text for
detail).
Capacitor required if C
Active Low Shutdown Pin. Connect to
ground to disable the regulator output.
When shutdown is not used, this pin
should be connected to the input pin.
Regulator Input. All pins must be con-
nected together for proper operation.
1
2
3
4
(Not to Scale)
ADP3335
TOP VIEW
Branding
Information
LFA
LFC
LFD
LFE
LFF
WARNING!
8
7
6
5
IN
IN
SD
NR
ADP3335
ESD SENSITIVE DEVICE
OUT
> 3.3 µF.