TCM8230MDA Toshiba Semiconductor, TCM8230MDA Datasheet

TCM8230MDA

Manufacturer Part Number

TCM8230MDA

Description

VGA CAMERA MODULE

Manufacturer

Toshiba Semiconductor

Datasheet

1.TCM8230MDA.pdf (27 pages)

Current page: 1 of 27
Download datasheet (992Kb)

TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC

TENTATIVE

VGA CAMERA MODULE

processor that meets with VGA format. In the sensor area 492 vertical and 660 horizontal signal pixels, and the image

size meets with 1/6 inch optical Format. Use of the CMOS process enables low power consumption operations. It

also provides excellent color reproduction through its primary color filter, and embedded camera signal processor

enables small and simple camera system. And this module can be assembled by the socket which is suitable for the

reflow soldering. So it is fit to use as an image input device for digital still cameras, PC cameras and mobile devices.

Features

1. General

2. Sensor

3. Camera signal processing

04/01/05

•

• Optical size

• Total pixel numbers : 698(H)x502(V)

• Signal pixel numbers : 660(H)x492(V)

• Pixel pitch

• Color filter

• Frame rate

• Raw data bit precision : 10bit

• Feed back clamp

• Maximum exposure time can be adjust from 1V to 15V

• Digital outputs

• Picture size

• Readout internal parameters

• Auto electrical shutter control (AES), auto gain control (AGC) and auto white balance (AWB) circuit

• Flickerless auto luminance control (ALC=AES+AGC) and auto flicker detection circuit for AC 50Hz / 60Hz fluorescent light

• Automatically blemish correction

• Vertical and Horizontal flip mode

The TCM8230MD(A) is a camera module which includes area color image sensor embedded with camera signal

● TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or

● The products described in this document are subject to f oreign exchange and f oreign trade control laws.

● The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA

● The inf ormation contained herein is subject to change without notice.

YUV=4:2:2 or RGB=5:6:5 ( 8bit parallel output )

Sensor gain setting, Electrical shutter exposure period, ALC and AWB reference value

jail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to

observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or

damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating range as set forth in the most

recent products speci f ications. Also, please keep in mind the precautions and conditions set f orth in the TOSHIBA Semiconductor Reliabilit y Handbook.

CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by

implication or otherwise under any intellectual propert y or other rights o f TOSHIBA CORPORATION or others.

VGA, QVGA, QQVGA, CIF, QCIF, subQCIF ( Sub-sampling , Windowing )

Module size : 6(W) x 6(D) x 4.5(H) mm

Sleep mode operation (It can be controlled by the I

Power supply : 2.8+/-0.2V or 2.5+/-0.2V (Sensor(photo diode), I/O) and 1.5+/-0.1V(Sensor(A/D converter), Digital)

C BUS I/F

: 1/6 inch optical format

: Max 30fps

: 3.75um(H)x3.75um(V) (square pixel)

: RGB color filter, Bayer arrangement (GR line and GB line are arranged alternately.)

TCM8230MD (A)

C Bus command)

TCM8230MD (A)

www.DataSheet4U.com

Ver. 1.20

1/27

Related parts for TCM8230MDA

Related keywords

TCM8230MDA datasheet
TCM8230MDA data sheet
TCM8230MDA pdf datasheet
TCM8230MDA component
TCM8230MDA part
TCM8230MDA distributor
TCM8230MDA RoHS
TCM8230MDA datasheet download