MC100EPT26 ON Semiconductor, MC100EPT26 Datasheet - Page 4

• Manufacturer Part Number: MC100EPT26
• Description: 1:2 Fanout Differential LVPECL to LVTTL Translator
• Manufacturer: ON Semiconductor

PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment:
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: [phone] or 800–344–3860 Toll Free USA/Canada
Fax: [phone] or 800–344–3867 Toll Free USA/Canada
Email: [e-mail]
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
German Phone: [phone] (M–F 1:00pm to 5:00pm Munich Time)
French Phone: [phone] (M–F 1:00pm to 5:00pm Toulouse Time)
English Phone: [phone] (M–F 12:00pm to 5:00pm UK Time)
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
ON Semiconductor and
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
0.15 (0.006) T
0.15 (0.006) T
–T–
*Available from Germany, France, Italy, England, Ireland
Email: ONlit–[e-mail]
Email: ONlit–[e-mail]
Email: [e-mail]
0.10 (0.004)
SEATING
PLANE
L
U
U
S
S
PIN 1
IDENT
D
2X
L/2
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
C
8
1
–V–
A
8x
5
4
K
G
0.10 (0.004)
REF
–U–
B
PLASTIC TSSOP PACKAGE
PACKAGE DIMENSIONS
M
http://onsemi.com
MC100EPT26
T
CASE 948R–02
DT SUFFIX
U
TSSOP–8
DETAIL E
ISSUE A
S
DETAIL E
4
V
S
CENTRAL/SOUTH AMERICA:
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
JAPAN: ON Semiconductor, Japan Customer Focus Center
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
F
Spanish Phone: [phone] (Mon–Fri 8:00am to 5:00pm MST)
Phone: [phone] (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Email: ONlit–[e-mail]
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: [phone]
Email: [e-mail]
0.25 (0.010)
M
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–[e-mail]
–W–
NOTES:
1.
2.
3.
4.
5.
6.
Y14.5M, 1982.
FLASH. PROTRUSIONS OR GATE BURRS. MOLD
FLASH OR GATE BURRS SHALL NOT EXCEED
0.15 (0.006) PER SIDE.
INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION SHALL NOT
EXCEED 0.25 (0.010) PER SIDE.
REFERENCE ONLY.
DETERMINED AT DATUM PLANE –W–.
DIM
G
M
A
B
C
D
F
K
L
DIMENSIONING AND TOLERANCING PER ANSI
CONTROLLING DIMENSION: MILLIMETER.
DIMENSION A DOES NOT INCLUDE MOLD
DIMENSION B DOES NOT INCLUDE
TERMINAL NUMBERS ARE SHOWN FOR
DIMENSION A AND B ARE TO BE
MILLIMETERS
MIN
2.90
2.90
0.80
0.05
0.40
0.25
0
0.65 BSC
4.90 BSC
_
MAX
3.10
3.10
1.10
0.15
0.70
0.40
6
_
0.031
0.002
0.016
0.010
0.114
0.114
MIN
0.026 BSC
0.193 BSC
MC100EPT26/D
0
INCHES
_
MAX
0.122
0.122
0.043
0.006
0.028
0.016
6
_