MC10ELT28D Motorola, MC10ELT28D Datasheet - Page 3

• Manufacturer Part Number: MC10ELT28D
• Description: TTL to Differential Pecl/Differential PECL to TTL Translator
• Manufacturer: Motorola

How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
MFAX: [e-mail] – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
ECLinPS and ECLinPS Lite
DL140 — Rev 3
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
Opportunity/Affirmative Action Employer.
–T–
–B–
8
1
G
–A–
8X
D
0.25 (0.010)
4
5
M
SEATING
PLANE
T B
S
A
OUTLINE DIMENSIONS
PLASTIC SOIC PACKAGE
S
J
M
CASE 751–05
_
D SUFFIX
ISSUE P
3–3
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
*MC10ELT28/D*
NOTES:
1. DIMENSIONS A AND B ARE DATUMS AND T IS A
2. DIMENSIONING AND TOLERANCING PER ANSI
3. DIMENSIONS ARE IN MILLIMETER.
4. DIMENSION A AND B DO NOT INCLUDE MOLD
5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
6. DIMENSION D DOES NOT INCLUDE MOLD
DATUM SURFACE.
Y14.5M, 1982.
PROTRUSION.
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE D DIMENSION AT MAXIMUM MATERIAL
CONDITION.
DIM
G
M
A
B
C
D
F
J
K
P
R
MC10ELT28 MC100ELT28
MILLIMETERS
MIN
4.80
3.80
1.35
0.35
0.40
0.18
0.10
5.80
0.25
1.27 BSC
0
_
MAX
5.00
4.00
1.75
0.49
1.25
0.25
0.25
6.20
0.50
7
_
MC10ELT28/D
MOTOROLA