T370HW01V0 AU_OPTRONICS, T370HW01V0 Datasheet - Page 25

• Manufacturer Part Number: T370HW01V0
• Description: COLOR TFT LCD MODULE
• Manufacturer: AU_OPTRONICS

PDF created with FinePrint pdfFactory Pro trial version
©Copyright AU Optronics, Inc.
March, 2004 All Rights Reserved.
No Reproduction and Redistribution Allowed
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
9-5 STORAGE
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM
When storing modules as spares for a long time, the following precautions are necessary.
(1)
(2)
(1)
(2)
(3)
Strong light exposure causes degradation of polarizer and color filter.
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5℃ and 35℃ at normal humidity.
The polarizer surface should not come in contact with any other object. It is recommended
that they be stored in the container in which they were shipped.
The protection film is attached to the bezel with a small masking tape. When the protection
film is peeled off, static electricity is generated between the film and polarizer. This should be
peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
When the module with protection film attached is stored for a long time, sometimes there
remains a very small amount of flue still on the Bezel after the protection film is peeled off.
You can remove the glue easily. When the glue remains on the Bezel or its vestige is
recognized, please wipe them off with absorbent cotton waste or other soft material like
chamois soaked with normal-hexane.
T370HW01 V.0 Ver0
http://www.fineprint.com
24/25