LM3S2918 Luminary Micro, Inc, LM3S2918 Datasheet - Page 99

• Manufacturer Part Number: LM3S2918
• Description: Lm3s2918 Arm Microcontroller
• Manufacturer: Luminary Micro, Inc

July 26, 2008
Bit/Field
9:8
5:4
2:0
7
6
3
MAXADCSPD
reserved
reserved
reserved
Name
WDT
HIB
Type
R/W
R/W
R/W
RO
RO
RO
Reset
0
0
0
0
0
0
Preliminary
Description
ADC Sample Speed
This field sets the rate at which the ADC samples data. You cannot set
the rate higher than the maximum rate. You can set the sample rate by
setting the MAXADCSPD bit as follows:
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
HIB Clock Gating Control
This bit controls the clock gating for the Hibernation module. If set, the
unit receives a clock and functions. Otherwise, the unit is unclocked and
disabled.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
WDT Clock Gating Control
This bit controls the clock gating for the WDT module. If set, the unit
receives a clock and functions. Otherwise, the unit is unclocked and
disabled. If the unit is unclocked, a read or write to the unit generates
a bus fault.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Value
0x2
0x1
0x0
Description
500K samples/second
250K samples/second
125K samples/second
LM3S2918 Microcontroller
99