NL6448AC33-13 NEC, NL6448AC33-13 Datasheet - Page 13

• Manufacturer Part Number: NL6448AC33-13
• Description: TFT Clolr LCD Module
• Manufacturer: NEC

www.datasheet4u.com
GENERAL CAUTION
(1) Caution when taking out the module
(2) Cautions for handling the module
(3) Cautions for the operation
(4) Cautions for the atmosphere
(5) Cautions for the module characteristics
(6) Other cautions
Liquid Crystal Display has the following specific characteristics. These are not defects or malfunctions.
The display condition of LCD module may be affected by the ambient temperature.
The LCD module uses cold cathode tubes for backlighting. Optical characteristics, like luminance or
uniformity, will change during time.
Uneven brightness and/or small spots may be noticed depending on different display patterns.
1)
1)
2)
3)
4)
5)
6)
1)
2)
1)
2)
1)
1)
2)
3)
Pick the pouch only, when taking out module from a shipping package.
As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a
protection sheet off from the LCD panel surface as slowly as possible.
As the LCD panel and back-light element are made from fragile glass material, impulse and pressure to the
LCD module should be avoided.
As the surface of polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning.
Do not pull the interface connectors in or out while the LCD module is operating.
Put the module display side down on a flat horizontal plane.
Handle connectors and cables with care.
When the module is operating, do not lose CILK, Hsync or Vsync signals. If any one of these signals is lost,
the LCD panel would be damaged.
Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
Dew drop atmosphere should be avoided.
Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage
in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is
recommended.
Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long
time may cause image sticking.
Do not disassemble and/or re-assemble LCD module.
Do not re-adjust variable resistor or switch etc.
When returning the module for repair or etc., please pack the module not to be broken.
We recommend to use the original shipping packages.
NL6448AC33-13
13