TM10032ABC TIANMA, TM10032ABC Datasheet - Page 18

• Manufacturer Part Number: TM10032ABC
• Description: LCD_Module
• Manufacturer: TIANMA

10. Precautions for Use of LCD Modules
10.1 Handling Precautions
10.1.1 The display panel is made of glass. Do not subject it to a mechanical
10.1.2 If the display panel is damaged and the liquid crystal substance inside it
10.1.3 Do not apply excessive force to the display surface or the adjoining areas
10.1.4 The polarizer covering the display surface of the LCD module is soft and
10.1.5 If the display surface is contaminated, breathe on the surface and gently
10.1.6 Do not attempt to disassemble the LCD Module.
10.1.7 If the logic circuit power is off, do not apply the input signals.
10.1.8 To prevent destruction of the elements by static electricity, be careful to
Solvents other than those mentioned above may damage the polarizer.
a. Be sure to ground the body when handling the LCD Modules.
b. Tools required for assembly, such as soldering irons, must be properly
c. To reduce the amount of static electricity generated, do not conduct
d. The LCD Module is coated with a film to protect the display surface.
shock by dropping it from a high place, etc.
leaks out, be sure not to get any in your mouth, if the substance comes
into contact with your skin or clothes, promptly wash it off using soap
and water.
since this may cause the color tone to vary.
Especially, do not use the following:
easily scratched. Handle this polarizer carefully.
wipe it with a soft dry cloth. If still not completely clear, moisten cloth
with one of the following solvents:
maintain an optimum work environment.
ground.
assembly and other work under dry conditions.
Be care when peeling off this protective film since static electricity may
be generated.
Isopropyl alcohol
Ethyl alcohol
Water
Ketone
Aromatic solvents
17/21