a2500r24c Anaren Microwave, a2500r24c Datasheet - Page 14

• Manufacturer Part Number: a2500r24c
• Description: Anaren Integrated Radio
• Manufacturer: Anaren Microwave

Page 14 of 26
A2500R24x – Users Manual
Release Date 01/10/11
The following statement must be included as a CAUTION statement in manuals and OEM
products to alert end users of FCC RF Exposure compliance:
To satisfy FCC RF Exposure requirements for mobile and base station transmission devices, a
separation distance of 20 cm or more should be maintained between the antenna of this device
and persons during operation. To ensure compliance, operation at closer than this distance is
not recommended. The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
If the A2500R24A and A2500R24C module is used in a portable application (antenna is less
than 20 cm from persons during operation), the end user is responsible for performing Specific
Absorption Rate (SAR) testing in accordance with FCC rules 2.1091.
2.2.
Canada (Industry Canada, IC)
The A2500R24A and A2500R24C modules have been certified for use in Canada under
Industry Canada (IC) Radio Standards Specification (RSS) RSS-210 and RSS-Gen.
From section 7.1.1 RSS-Gen, Issue 2, June 2007, Modular Transmitter Approval:
Host devices which contain separately certified modules do not need to be recertified, provided
that they meet the following conditions:
a) The host device, as a stand-alone unit without any separately certified modules, complies
with all applicable Radio Standards Specifications.
b) The host device and all the separately certified modules it contains jointly meet the RF
exposure compliance requirements of RSS-102, if applicable.
c) The host device complies with the certification labeling requirements of each of the modules it
contains.
Note: Compliance of a module in its final configuration is the responsibility of the applicant. A
host device will not be considered certified if the instructions regarding antenna configuration
provided in the original description, of one or more separately certified modules it contains, were
not followed.
From section 5.2, RSS-Gen, Issue 2, June 2007, Equipment Labels: All Category I radio
equipment intended for use in Canada shall permanently display on each transmitter, receiver,
or inseparable combination thereof, the applicant's name (i.e., manufacturer's name, trade
name or brand name), model number and certification number. This information shall be affixed
in such a manner as not to be removable except by destruction or defacement. The size of the
lettering shall be legible without the aid of magnification, but is not required to be larger than 8-
point font size. If the device is too small to meet this condition, the information can be included
in the user manual upon agreement with Industry Canada.