a2500r24c Anaren Microwave, a2500r24c Datasheet - Page 7

• Manufacturer Part Number: a2500r24c
• Description: Anaren Integrated Radio
• Manufacturer: Anaren Microwave

To transmit, a frame of data is placed in the FIFO; this may include a destination address. A
transmit command is given, which will transmit the data according to the initial setup of the
registers. To receive data, a receive command is given, which enables the unit to “listen” for a
transmission and when one occurs put the received frame in the FIFO. When neither transmit or
receive is required the device can enter either an Idle mode, from which it can quickly re-enter
receive, a transmit mode, or a low power sleep mode, from which a crystal startup is also
required prior to transmit or receive operation.
Below a block diagram is given for each of the A2500R24C and A2500R24A modules.
•
•
•
•
•
•
•
A2500R24x – Users Manual
Release Date 01/10/11
Antenna
Filtering
Matching
Physical
MAC
Microcontroller Interface
Power Management
o The antenna couples energy between the air and the AIR module. For
o Filtering removes spurious signals to comply with regulatory intentional radiator
o Matching provides the correct loading of the transmit amplifier to achieve the
o The physical layer provides conversions between data, symbol and RF signal.
o The MAC layer is part of the Logical Link Layer and provides frame handling,
o The microcontroller interface exposes registers and commands for the physical
o Power management ensures a stable supply for the internal functions as well as
applications where installations are done by an end user (non-professional), an
omni-directional antenna pattern is desired, such that the application will work
equally well in any direction. Similarly for peer to peer or point to multipoint
applications an omni-directional pattern is desired such that all nodes have a fair
chance of communicating. The A2500R24A module has an integral antenna that
is near omni-directional, whereas the A2500R24C has approved antenna options
ranging from near omni-directional to shaped front/back patterns (useful for
inline, professional installations). Note that the end radiation pattern depends not
only on the antenna, but also on the ground plane, enclosure and installation
environment.
requirements.
highest output power as well as the correct loading for the receive LNA to
achieve the best sensitivity.
addressing and medium access services.
and MAC layers to a microcontroller.
providing means for a low power sleep mode (in which case, most of the
transceiver is power off).
Page 7 of 26