upd78f0124m6gba1-8et Renesas Electronics Corporation., upd78f0124m6gba1-8et Datasheet - Page 137

no-image

upd78f0124m6gba1-8et

Manufacturer Part Number
upd78f0124m6gba1-8et
Description
8-bit Single-chip Microcontrollers
Manufacturer
Renesas Electronics Corporation.
Datasheet
(2) Capture/compare control register 00 (CRC00)
(3) 16-bit timer output control register 00 (TOC00)
Note The capture operation is not performed if both the rising and falling edges are specified as the valid edge of
Cautions 1. Timer operation must be stopped before setting CRC00.
This register controls the operation of the 16-bit timer capture/compare registers (CR000, CR010).
CRC00 can be set by a 1-bit or 8-bit memory manipulation instruction.
RESET input clears CRC00 to 00H.
This register controls the operation of the 16-bit timer/event counter 00 output controller. It sets/resets the timer
output F/F (LV00), enables/disables output inversion and 16-bit timer/event counter 00 timer output,
enables/disables the one-shot pulse output operation, and sets the one-shot pulse output trigger via software.
TOC00 can be set by a 1-bit or 8-bit memory manipulation instruction.
RESET input clears TOC00 to 00H.
Address: FFBCH
Symbol
CRC00
TI000.
2. When the mode in which clear & start occurs on a match between TM00 and CR000 is
3. To ensure that the capture operation is performed properly, the capture trigger requires a
selected with 16-bit timer mode control register 00 (TMC00), CR000 should not be specified
as a capture register.
pulse longer than two cycles of the count clock selected by prescaler mode register 00
(PRM00).
CRC002
CRC001
CRC000
7
0
0
1
0
1
0
1
Figure 6-6. Format of Capture/Compare Control Register 00 (CRC00)
After reset: 00H
Operates as compare register
Operates as capture register
Captures on valid edge of TI010
Captures on valid edge of TI000 by reverse phase
Operates as compare register
Operates as capture register
6
0
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
R/W
User’s Manual U16315EJ3V1UD
5
0
CR010 operating mode selection
CR000 operating mode selection
CR000 capture trigger selection
4
0
3
0
Note
CRC002
2
CRC001
1
CRC000
0
137

Related parts for upd78f0124m6gba1-8et