ssc-swts903 Seoul Semiconductor, ssc-swts903 Datasheet - Page 10

• Manufacturer Part Number: ssc-swts903
• Description: Chip Device Led
• Manufacturer: Seoul Semiconductor

SSC-QP-0401-06(REV.0)
11. Precaution for use
(1) Storage
with a desiccant . Otherwise, to store them in the following environment is recommended.
(2) Attention after opened
light transmission efficiency, causing the light intensity to drop. Attention in followed.
(3) In case of more than 1 week passed after opening or change color of indicator on desiccant
components shall be dried 10-12hr. at 60±5°C.
(4) In case of supposed the components is humid, shall be dried dip-solder just before.
(5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to
normal temp. after soldering.
(6) Quick cooling shall avoid.
(7) Components shall not be mounted on warped direction of PCB.
(8) Anti radioactive ray design is not considered for the products listed here in.
(9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When
washing is required, IPA should be used.
(10) When the LEDs are illuminating, operating current should be decided after considering the ambient
maximum temperature.
(11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more
after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage.
(12) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry
place.
(14) The appearance and specifications of the product may be modified for improvement without notice.
However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the
In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator)
Temperature : 5°C~30°C, Humidity : 60%RH max.
a. After opened and mounted, the soldering shall be quickly.
b. Keeping of a fraction
100Hr at 80±5°C or 12Hr at 100±5°C.
Temperature : 5 ~ 40°C
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: [phone] FAX: [phone]
SEOUL SEMICONDUCTOR CO,. LTD.
Humidity : less than 30%
- 10/13
SSC-SWTS903