maxq3183-ran Maxim Integrated Products, Inc., maxq3183-ran Datasheet

no-image

maxq3183-ran

Manufacturer Part Number
maxq3183-ran
Description
Low-power, Multifunction, Polyphase Afe With Harmonics And Tamper Detect
Manufacturer
Maxim Integrated Products, Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
maxq3183-ran+
Manufacturer:
MAXIM
Quantity:
16
The MAXQ3183 is a dedicated electricity measurement
front-end that collects and calculates polyphase volt-
age, current, power, energy, and many other metering
and power-quality parameters of a polyphase load. The
computed results can be retrieved by an external mas-
ter through the on-chip serial peripheral interface
(SPI™) bus. This bus is also used by the external mas-
ter to configure the operation of the MAXQ3183 and
monitor the status of operations.
The MAXQ3183 performs voltage and current measure-
ments using an integrated ADC that can measure up to
seven external differential signal pairs. An eighth differ-
ential signal pair is used to measure the die tempera-
ture. An internal amplifier automatically adjusts the
current channel gain to compensate for low-current
channel-signal levels.
♦ Compatible with 3-Phase/3-Wire, 3-Phase/4-Wire
♦ Active Power and Energy of Each Phase and
♦ Reactive Power and Energy of Each Phase and
♦ Apparent Power and Energy of Each Phase and
♦ Neutral Line Current Measurement
♦ Vector Sum of 3-Phase Currents and Neutral
♦ Line Frequency (Hz)
♦ Power Factors
♦ Voltage Phasor Angles
♦ Voltage and Current Phase Sequence Indications
♦ Phase Voltage Absence Detection
♦ Voltage and Current Harmonic Measurement
19-4955; Rev 0; 12/09
MAXQ is a registered trademark of Maxim Integrated Products, Inc.
SPI is a trademark of Motorola, Inc.
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may be
simultaneously available through various sales channels. For information about device errata, go to: www.maxim-ic.com/errata.
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Combined 3-Phase (kWh), Positive and Negative
Combined, Positive and Negative
Combined 3-Phase
Current
3-Phase Multifunction Electricity Meters
Low-Power, Multifunction, Polyphase AFE
________________________________________________________________ Maxim Integrated Products
General Description
with Harmonics and Tamper Detect
Applications
Features
♦ Phase Current THDN
♦ Fundamental and Total Power and Energy
♦ AC/DC Mode Current and Voltage Measurement
♦ Two Pulse Outputs: Configurable for Active,
♦ Programmable Meter Constants and Pulse Widths
♦ Programmable No-Load Current Threshold
♦ Programmable Thresholds for Undervoltage and
♦ Programmable Threshold for Overcurrent Detection
♦ Programmable Vector Sum Threshold for Bypass
♦ Amp-Hours in Absence of Voltage Signals
♦ On-Chip Digital Temperature Sensor
♦ Precision Internal Voltage Reference 2.048V
♦ Supports Software Meter Calibration
♦ Up to 3-Point Multipoint Calibration to
♦ Power-Fail Detection
♦ Bidirectional Reset Input/Output
♦ SPI-Compatible Serial Interface with Interrupt
♦ Single 3.3V Supply, Low Power (35mW typical)
+ Denotes a lead(Pb)-free/RoHS-compliant package.
Pin Configuration and Typical Application Circuit appear at
end of data sheet.
MAXQ3183-RAN+
Reactive, and Apparent Powers
Overvoltage Detection
Detection
(30ppm/°C typical), Also Supports An External
Voltage Reference
Compensate for Transducer Nonlinearity
Request (IRQ) Output
PART
-40°C to +85°C
Ordering Information
TEMP RANGE
PIN-PACKAGE
28 TSSOP
1

Related parts for maxq3183-ran

Related keywords