tb62214ftg TOSHIBA Semiconductor CORPORATION, tb62214ftg Datasheet - Page 16
tb62214ftg
Manufacturer Part Number
tb62214ftg
Description
Bicd Constant-current Two-phase Bipolar Stepping Motor Driver Ic
Manufacturer
TOSHIBA Semiconductor CORPORATION
Datasheet
1.TB62214FTG.pdf
(27 pages)
IC Power Consumption
consumed by the output transistors, and 2) the power consumed by the digital logic and pre-drivers.
The power consumed by the TB62214FG/FTG is approximately the sum of the following two: 1) the power
The power consumed by the output transistors is calculated, using the R
Whether in Charge, Fast Decay or Slow Decay mode, two of the four transistors comprising each H-bridge
contribute to its power consumption at a given time.
power consumption in the output transistors is calculated as follows:
standby modes:
digital logic operates off a voltage regulator that is internally connected to the V
consists of the digital logic connected to V
output transistors. The total power consumed by I
Thus the power consumed by each H-bridge is given by:
In two-phase excitation mode (in which two phases have a phase difference of 90°), the average
The power consumption in the I
The current consumed in the digital logic portion of the TB62214FG/FTG is indicated as I
Hence, the total power consumption of the TB62214FG/FTG is:
Board design should be fully verified, taking thermal dissipation into consideration.
P (out) = I
R
P (out) = 2Hsw × 1.0
Normal operation mode: I (I
Standby mode: I (I
P (I
I
V
P = P (out) + P (I
P (Standby) + P (out) = 24 (V) × 0.002 (A) = 0.048 (W)
OUT
ON
M
The standby power consumption is given by:
M
= 24 V
= 1.0 Ω (@2.0 A), the sum of the high-side DMOS and low-side DMOS
) = 24 (V) × 0.005 (A) = 0.12 (W)........................................................... (3)
(Peak) = 1.0 A
OUT
(A) × V
M
) = 2.12 (W)
M1
2
) = 2.0 mA (typ.)
(A) × 1.0 (Ω) = 2.0 (W)................................................ (2)
DS
(V) = 2 × I
M3
M
) = 5.0 mA (typ.)
domain is calculated separately for normal operation and
OUT
16
M
2
(24 V) and the network affected by the switching of the
× R
ON
Mx
......................................... (1)
can be estimated as:
ON (D-S)
value of 1.0Ω.
TB62214FG/FTG
M
power supply. It
2010-06-10
Mx
. The