vla541-01r ISAHAYA ELECTRONICS CORPORRATION, vla541-01r Datasheet - Page 4

• Manufacturer Part Number: vla541-01r
• Description: Hybrid Ic For Driving Igbt Modules
• Manufacturer: ISAHAYA ELECTRONICS CORPORRATION

FOR SAFETY USING
Packing
Carrying
Storage
Extended storage
Maximum ratings
Polarity
in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage. When
handling Hics, please note the following cautions.
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production, and
TENTATIVE
When exposed to outside shocks, rain and certain environmental contaminators, the packing materials
will deteriorates. Please take care in handling.
characteristics, risk of solder ability, and external damage may occur.
have been stored for more than one year or under severe conditions, be sure to check that the exterior
is free from flaw and other damages.
voltage, etc. must not exceed these conditions.
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
When storing Hics, please observe the following notices or possible deterioration of their electrical
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
To prevent any electrical damages, use Hics within the maximum ratings. The temperature, current,
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
The materials used in packing Hics can only withstand normal external conditions.
1)
2)
3)
4)
5)
1)
2)
3)
4)
Devices must be stored where fluctuation of temperature and humidity is minimal, and must not
be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius with
humidity at 40 to 60%.
Avoid locations where corrosive gasses are generated or where much dust accumulates.
Storage cases must be static proof.
Avoid putting weight on boxes.
Don’t stack boxes too high. Avoid placing heavy materials on boxes.
Boxes must be positioned correctly during transportation to avoid breakage.
Don't throw or drop boxes.
Keep boxes dry. Avoid rain or snow.
Minimal vibration and shock during transportation is desirable.
CAUTIONS
4
Hybrid IC for driving IGBT modules
VLA541-01R
HYBRID IC