a1321elh Allegro MicroSystems, Inc., a1321elh Datasheet - Page 5

• Manufacturer Part Number: a1321elh
• Description: Ratiometric Linear Hall Effect Sensor For High-temperature Operation
• Manufacturer: Allegro MicroSystems, Inc.

Quiescent Voltage Output. In the quiescent state (no
magnetic fi eld), the output equals one half of the supply voltage
over the operating voltage range and the operating temperature
range. Due to internal component tolerances and thermal con-
siderations, there is a tolerance on the quiescent voltage output
both as a function of supply voltage and as a function of ambient
temperature. For purposes of specifi cation, the quiescent voltage
output as a function of temperature is defi ned in terms of mag-
netic fl ux density, B, as:
This calculation yields the device’s equivalent accuracy,
over the operating temperature range, in gauss (G).
Sensitivity. The presence of a south-pole magnetic fi eld per-
pendicular to the package face (the branded surface) increases
the output voltage from its quiescent value toward the supply
voltage rail by an amount proportional to the magnetic fi eld
applied. Conversely, the application of a north pole will decrease
the output voltage from its quiescent value. This proportionality
is specifi ed as the sensitivity of the device and is defi ned as:
The stability of sensitivity as a function of temperature is
defi ned as:
A1321-DS Rev. 3
∆Sens
∆
out(q)(∆Τ)
Ratiometric Linear Hall Effect Sensor for High-Temperature Operation
(∆Τ)
Sens
=
Sens
=
=
(Τ
Sens
∆
Α
V
)
out(–B)
out(q)(Τ
(25ºC)
–
Sens
Sens
Α
–
B
)
(25ºC)
(25ºC)
–
V
out(+B
∆
out(q)(25ºC)
× 100%
A1321/A1322/A1323
Characteristic Defi nitions
(1)
(2)
(3)
Ratiometric. The A132X family features a ratiometric output.
The quiescent voltage output and sensitivity are proportional to
the supply voltage (ratiometric).
The percent ratiometric change in the quiescent voltage output is
defi ned as:
and the percent ratiometric change in sensitivity is
defi ned as:
Linearity and Symmetry. The on-chip output stage
is designed to provide a linear output with a supply voltage of
5 V. Although application of very high magnetic fi elds will not
damage these devices, it will force the output into a non-linear
region. Linearity in percent is measured and defi ned as:
and output symmetry as:
∆
∆Sens
out(q)(∆V)
(∆V)
Lin+
Lin–
Sym
=
=
=
=
=
∆
∆Sens
2(∆V
2(∆V
out(q)(V
∆V
∆V
∆V
∆V
(V
out(+B / 2)
out(–B / 2)
out(+B)
out(–B)
out(+B)
V
CC
V
out(q)
CC
CC
Allegro MicroSystems, Inc.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 [phone]
www.allegromicro.com
CC
)
)
÷
÷ 5 V
–
–
–
÷
– V
÷ 5 V
∆Sens
– V
– V
∆V
∆V
∆V
∆
out(–B)
out(q)
out(q)
out(q)
out(q)
out(q)
out(q)(5V)
(5V)
)
)
× 100%
× 100%
× 100%
× 100%
× 100%
(4)
(5)
(6)
(7)
(8)
5