ilx548k Sony Electronics, ilx548k Datasheet - Page 10

• Manufacturer Part Number: ilx548k
• Description: 5340 Pixel ? 3 Line Ccd Linear Sensor Color
• Manufacturer: Sony Electronics

3) Soldering
4) Dust and dirt protection
5) Exposure to high temperatures or humidity will affect the characteristics. Accordingly avoid storage or
6) CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
a) Make sure the package temperature does not exceed 80°C.
b) Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded
c) To dismount an imaging device, do not use a solder suction equipment. When using an electric desoldering
a) Operate in clean environments.
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
c) Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be careful not to scratch
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
usage in such conditions.
30W soldering iron and solder each pin in less then 2 seconds. For repairs and remount, cool sufficiently.
tool, ground the controller. For the control system, use a zero cross type.
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized
air is recommended.)
the glass.
moving to a room with great temperature differences.
– 10 –
ILX548K